Buick Enclave 2022 Getting To Know Your Manual
![Buick Enclave 2022 manual cover](/images/dNWAWfcFkTdxbUlMLevDaRJO/thumbs/thumb175x175.webp)
To reset the oil life monitor, turn the ignition to the "On/Run" position without starting the engine. Use the steering wheel controls to navigate to "Oil Life" on the driver information center. Press the "Reset" or "OK" button and confirm the reset.
The recommended tire pressure for the 2022 Buick Enclave is typically 35 PSI for both front and rear tires. Always check the placard located on the driver's side door jamb for specific information.
To pair your smartphone, enable Bluetooth on your device. On the Enclave's infotainment screen, select "Phone", then "Pair Device". Choose your device from the list and confirm the PIN if prompted.
To jump-start, connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the good battery. Connect one end of the negative cable to the negative terminal of the good battery and the other end to a metal ground on the engine block of the Enclave. Start the working vehicle, then the Enclave.
To enable rear park assist, press the Park Assist button located on the dashboard. A light will illuminate to indicate activation. The system will automatically engage when reversing.
Maintenance intervals for the Buick Enclave include an oil change every 7,500 miles, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. Refer to the owner’s manual for a detailed maintenance schedule.
To update the navigation system, visit the Buick website to check for available updates. Download the update onto a USB drive, then insert the drive into the Enclave’s USB port. Follow the on-screen instructions to complete the update.
If the check engine light illuminates, check for any obvious issues such as a loose gas cap. If the light remains on, schedule a diagnostic check with a certified Buick technician to identify and resolve the issue.
To replace the cabin air filter, open the glove box and remove any contents. Depress the side tabs to lower the glove box completely. The cabin air filter is located behind the glove box. Remove the old filter and install the new one, ensuring it is oriented correctly.
To adjust the head-up display, use the controls located to the left of the steering wheel. You can adjust the brightness, position, and content displayed by toggling the corresponding buttons.