Bostitch N88RH17-2 Instruction Manual

Pages 28

Year 0

Language(s)

of 28

Bostitch N88RH17-2 Nailer Specification

The Bostitch N88RH17-2 Nailer is a robust and versatile pneumatic tool designed for high-performance in framing and sheathing applications. It operates using a 21-degree plastic collated framing nail system, accommodating nail lengths ranging from 2 inches to 3-1/2 inches and diameters from .113 to .148 inches. With a magazine capacity of up to 64 nails, this nailer ensures efficiency and minimal downtime during extensive projects. The operating pressure for the N88RH17-2 ranges between 70 to 120 PSI, providing sufficient power to drive nails into various types of wood with ease.

Weighing in at 7.6 pounds, the tool balances power with maneuverability, reducing operator fatigue during prolonged use. Its aluminum housing enhances durability while maintaining a lightweight structure. The nailer features a patented push-button adjustable depth guide, allowing users to set the desired depth for precise nail placement quickly. Additionally, it incorporates a tool-free selectable trigger system that enables rapid switching between sequential and contact modes, catering to different nailing requirements.

The Bostitch N88RH17-2 is equipped with an adjustable rafter hook, providing convenient storage and accessibility on the job site. The integrated rubber grip handle ensures comfort and control, further improving user experience. Maintenance is simplified with a no-mar tip and an easy-to-clear nosepiece designed to reduce downtime due to jammed nails. This tool is specifically engineered for professional builders and contractors seeking reliability and efficiency in demanding construction environments.

Bostitch N88RH17-2 Nailer F.A.Q.

How do I load nails into the Bostitch N88RH17-2 Nailer?

To load nails, first disconnect the tool from the air supply. Open the magazine by sliding the pusher back. Insert the nail strip into the magazine with the pointed end facing downward. Close the magazine until it clicks into place.

What is the recommended air pressure for operating the Bostitch N88RH17-2 Nailer?

The recommended operating air pressure for the Bostitch N88RH17-2 Nailer is between 70 and 120 PSI. Ensure your air compressor is set within this range for optimal performance.

How can I clear a jam from the nailer?

First, disconnect the tool from the air supply. Open the magazine and remove any nails. Use a screwdriver to gently clear the jammed nail from the nose area. Reload the nails and reconnect the air supply.

What type of nails can be used with the Bostitch N88RH17-2 Nailer?

The Bostitch N88RH17-2 Nailer is compatible with 21-degree plastic collated framing nails ranging from 2 to 3-1/2 inches in length.

How do I perform regular maintenance on the Bostitch N88RH17-2 Nailer?

Regular maintenance includes cleaning the tool after use, checking for loose screws, and lubricating the O-rings with pneumatic tool oil. Inspect the air hose and fittings for leaks regularly.

Why is my nailer not firing nails consistently?

Inconsistent firing can be due to low air pressure, a clogged air filter, or worn-out O-rings. Ensure your compressor is set to the correct PSI and check for any blockages or worn parts.

How can I adjust the depth of drive on the Bostitch N88RH17-2 Nailer?

To adjust the depth of drive, rotate the depth adjustment wheel located near the trigger. Turn clockwise to increase depth and counterclockwise to decrease it. Test on a scrap piece of wood to ensure the desired depth.

What safety precautions should be taken when using the Bostitch N88RH17-2 Nailer?

Always wear safety goggles and ear protection. Ensure the work area is clean and well-lit. Never point the nailer at yourself or others, and keep fingers away from the trigger when not in use.

What should I do if the nailer leaks air?

If the nailer is leaking air, check the air hose connections and ensure they are tight. Inspect the O-rings and seals for wear or damage and replace them if necessary.

Can I use the Bostitch N88RH17-2 Nailer for metal roofing?

The Bostitch N88RH17-2 Nailer is primarily designed for wood framing and may not be suitable for metal roofing. It is recommended to use a tool specifically designed for metal roofing applications.