Boss Giga Delay DD-20 Owner’s Manual
![Boss Giga Delay DD-20 manual cover](/images/a4dee81f99201be860284304/thumbs/thumb175x175.webp)
To perform a factory reset on the Boss Giga Delay DD-20, turn off the pedal, then hold down the 'MODE' and 'ON/OFF' buttons while powering it back on. This will reset the unit to its default settings.
The Boss Giga Delay DD-20 offers a maximum delay time of up to 23 seconds in the 'LONG' mode.
To switch between different delay modes on the DD-20, use the 'MODE' knob to select the desired delay type. The available modes include Standard, Analog, Tape, Modulate, and more.
Ensure that the connections are secure and that the input and output jacks are properly plugged in. Also, check if the pedal is receiving power and the volume levels are appropriately set.
Yes, the DD-20 allows for an external footswitch to be connected via the 'TEMPO/EXP' jack, enabling additional control over functions like tap tempo or expression pedal adjustments.
To save a preset, adjust the settings as desired, then press and hold one of the memory buttons (A, B, C, or D) until the display blinks. To recall a preset, simply press the corresponding memory button.
The Boss DD-20 requires a PSA series AC adapter, specifically a 9V DC power supply with a negative center pin.
To use the tap tempo feature, tap the 'TAP TEMPO' button at the desired tempo. The delay time will adjust according to the interval between your taps.
Yes, the DD-20 can operate in stereo mode by using both the 'OUTPUT A' and 'OUTPUT B' jacks to connect to two amplifiers or channels.
First, check all cables and power connections. Ensure the power supply is functioning. If the problem persists, try resetting the device or consult the manual for specific troubleshooting advice.