Bose SoundLink Around-Ear v2 Owner's Guide

Bose SoundLink

around-ear Bluetooth headphones

Owners Guide

2 - English

Safety Information

201 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without written permission.

Please read this owners guide Please take the time to follow the instructions in this owners guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference.

WARNING: Contains small parts which may be a choking hazard. Not suitable

for children under age 3. This product contains magnets which can be harmful to

pacemaker wearers. To reduce the risk of fire or electrical shock, do not expose the

product to rain or moisture. Do not expose this apparatus to dripping or splashing, and do not place objects

filled with liquids, such as vases, on or near the apparatus. As with any elec- tronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.

Do not place any naked flame sources, such as lighted candles, on or near the apparatus.

Use caution when using your headset/headphones while operating a vehicle or engaging in any activity that requires your full attention. Check and follow local laws regarding mobile phone and headphone/headset use. Some jurisdictions impose specific limitations, such as single earpiece configuration, on the use of such products while driving.

Sounds that you rely on as reminders or warnings may have an unfamiliar character when using headphones. Be aware of how these sounds may vary in character so you can recognize them as needed.

DO NOT use mobile phone adapters to connect headphones to airplane seat jacks as this could result in personal injury such as burns or property damage due to overheating. Remove and disconnect immediately if you experience warming sensation or loss of audio.

Except in case of emergency, Bose recommends that you NOT use these headphones as aviation communication headsets because:

- No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.

- Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.

- The Bose SoundLink around-ear Bluetooth headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.

Do not submerge or expose for extended period to water or wear while partici- pating in water sports, i.e. swimming, waterskiing, surfing, etc.

Do not leave a battery on prolonged charge when not in use.

CAUTION: Refer to the owners guide for safety related information. Make no modifications to the system or accessories. Unauthorized alterations

may compromise safety, regulatory compliance, and system performance. Long-term exposure to loud music may cause hearing damage. It is best

to avoid extreme volume when using headphones, especially for extended periods.

Use only with an agency approved power supply meeting local regulatory requirements (ex. UL, CSA, VDE, CCC).

Refer to the power supply owners guide for safety related information. Do not use headphones when operating a motor vehicle or anywhere the in-

ability to hear outside sounds may present a danger to you or others. Do not drop, sit on or allow the headphones to be immersed in water. Be sure the earcup ports are kept clear, and that no moisture is allowed to get

inside the earcup. The Bose SoundLink around-ear Bluetooth headphones do not require sched-

uled cleaning. Should cleaning be necessary, simply wipe the outside surfaces with a soft cloth.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance.

Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Only use attachments/accessories specified by the manufacturer. 8. Refer all servicing to qualified personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antenna or transmitter.

In the United States: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com- munications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit than the one to which the

receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Bose Corporation could void the users authority to operate this equipment.

In USA and Canada: This device complies with part 15 of the FCC rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This class B digital apparatus complies with CAN ICES-3 B / NMB-3 B. Output power less than 6.3mW (8 dBm).

Other agency markings FCC ID: A94BA1 IC: 3232A-BA1 Engineered in the United States Made in China Meets IDA Requirements

Bose SoundLink around-ear Bluetooth headphones Model BA1

XX Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent

(CR(VI)) Polybrominated Biphenyl (PBB)

Polybrominated diphenylether (PBDE)

Metal parts X 0 0 0 0 0 Plastic parts

0 0 0 0 0 0

Speakers X 0 0 0 0 0 Cables X 0 0 0 0 0 O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.

7

English - 3

Contents

Using the headphones ...................................................................................................................................... 4 Introduction.................................................................................................................................................................................................... 4

Thank you ................................................................................................................................................................................................. 4

Included with the headphones ............................................................................................................................................................ 4

Control module features ...................................................................................................................................................................... 4

Charging the battery ..................................................................................................................................................................................... 5

Tips for longer battery life .................................................................................................................................................................... 5

Connecting the headphones to your Bluetooth device .......................................................................................................................... 6

To pair the headphones with your device .......................................................................................................................................... 6

Locating the Bluetooth device list ...................................................................................................................................................... 7

Battery charge level (for iOS devices) ................................................................................................................................................ 7

Pairing additional devices .................................................................................................................................................................... 7

Using multiple devices ......................................................................................................................................................................... 7

Wearing the headphones ............................................................................................................................................................................. 7

Recognizing the lights and tones............................................................................................................................................................... 8

Bluetooth Indicator .............................................................................................................................................................................. 8

Battery Indicator .................................................................................................................................................................................. 8

Audio Tones ............................................................................................................................................................................................. 8

Playback and phone call actions ................................................................................................................................................................. 8

Using the optional audio cable ................................................................................................................................................................... 9

To attach the audio cable ..................................................................................................................................................................... 9

Reference ............................................................................................................................................................10 Maintenance ................................................................................................................................................................................................... 10

Battery care ............................................................................................................................................................................................. 10

Cleaning the headphones ..................................................................................................................................................................... 10

Replacement parts and accessories ................................................................................................................................................... 10

Reattaching earcup cushions .............................................................................................................................................................. 11

Troubleshooting ........................................................................................................................................................................................... 11

Customer service ........................................................................................................................................................................................... 12

Limited Warranty ........................................................................................................................................................................................... 12

Technical information ................................................................................................................................................................................... 12

4 - English

Using the headphones

Introduction

Thank you We appreciate your choice of the Bose SoundLink around-ear Bluetooth headphones. These wireless stereo headphones combine the audio performance and comfort you expect from Bose with the freedom to move away from your source.

Included with the headphones

Bluetooth control module (removable)

Optional audio cable

USB charging cable

Carry bag

Control module features

Multi-function button

Volume Up

Volume Down

Power switch

Bluetooth indicator

Battery indicator

USB charger connector

English - 5

Using the headphones

Charging the battery Although the battery is partially charged at the factory, we recommend you fully charge the battery before first use. Allow up to 3 hours for a full charge.

1. Plug the small end of the USB cable into the headphones.

2. Plug the large end of the USB cable into an agency approved wall USB charger (not supplied) or a powered USB port on your computer.

Note: The control module can also be charged when disconnected from the headphone earcup.

Wall USB charger (not supplied)

Powered USB port on computer

3. Allow up to 3 hours for a full charge.

The battery indicator will blink amber while charging and turn green when charging is complete.

Battery indicator

Note: The headphones will not operate while charging.

Note: Before charging, be sure the headphones are at room temperature, between 41F (5C) and 104F (40C).

Tips for longer battery life When fully charged, your Bose SoundLink around-ear Bluetooth headphones will provide approximately 7 hours of wireless audio.

Always slide the Power switch off when the headphones are not in use. This will help preserve battery life.

Be aware that certain audio sources will deplete the battery more quickly than others.

Do not leave the battery uncharged for long periods of time. Fully charge before storing.

Battery Indicator Color Indicates:

Green (solid) 1/2 hour to 7 hours remaining battery time

Amber (solid) Less than 1/2 hour remaining battery time

Red (blinking) Recharge headphones now

Amber (blinking) Headphones are charging

Green (while charging) Headphones are fully charged

Red (while charging) Headphones are not within acceptable temperature range

6 - English

Using the headphones

Connecting the headphones to your Bluetooth device To use your SoundLink around-ear Bluetooth headphones with a Bluetooth device (such as a smartphone or tablet), you must first establish a wireless connection between the headphones and the device. This process is called pairing. once the headphones and a device have been paired, they will automatically reconnect the next time you use them together.

To pair the headphones with your device 1. Slide the control module power switch to on.

Power switch

2. Press and hold the Multi-Function and Volume + buttons together until the Bluetooth indicator blinks purple. The headphones are now discoverable and ready to pair with your device.

00:01 Discoverable

3. Enable Bluetooth on your device and locate the Bluetooth device list. (For help, see Locating the Bluetooth device list on page 7.)

4. Select Bose SoundLink around-ear from the device list. If your device requires a passkey, enter 0000. When the wireless connection is complete, the Bluetooth indicator will turn solid blue.

BluetoothSettings

Devices

Bluetooth ON

ConnectedBose AE Soundlink

Connected

Note: If the Bluetooth indicator does not turn solid blue, the wireless connection has not been made. Turn the headphones off and repeat steps 1 to 4, or see Troubleshooting on page 11.

English - 7

Using the headphones

Locating the Bluetooth device list iOS 5: Settings > General > Bluetooth > ON > Bose AE SoundLink

iOS 6: Settings > Bluetooth > ON > Bose AE SoundLink

Android: Settings > Wireless & Networks > Bluetooth or Bluetooth Settings > ON > Search or Scan for Devices > Bose AE SoundLink

Blackberry: Home > Manage Connections > Set Up Bluetooth > Search > Bose AE SoundLink

Mac OS X: System Preferences > Bluetooth > ON > Bose AE SoundLink

Windows 7: Start > Control Panel > Hardware and Sound > View Devices and Printers > Add a Device > Bose AE SoundLink

Windows XP: Start > Control Panel > Bluetooth Devices > Bose AE SoundLink

Note: For additional help locating the device list, refer to the owners guide that came with your device.

Battery charge level (for iOS devices) When connected to SoundLink around-ear Bluetooth headphones, iOS devices will display the SoundLink around-ear Bluetooth battery charge level near the upper right corner of the screen.

Pairing additional devices You can pair up to eight Bluetooth devices with your headphones. To pair additional devices with your headphones, repeat steps 2-3 on page 6 for each device. Only two audio devices can be connected at the same time.

Using multiple devices If you have two audio devices connected with your headphones, you can easily stop listening to one device and start listening to another. Simply stop or pause the music or video on the first device, then start the music or video on the second device. The headphones will switch to the device that is currently playing.

If you receive a phone call on a connected phone while you are listening to a connected audio source, the audio source will pause for the phone call and resume when the call has ended. For more information see Playback and phone call actions on page 8.

Wearing the headphones Be sure to wear your SoundLink around-ear Bluetooth headphones with the left earcup (L) and control module over your left ear. You can easily access the control module with your left hand, as shown. Use your thumb to control the volume and power switch; use your index finger to cont ol the Multi-function button.

Using the volume controls

Using the Multi-function button

RL

8 - English

Using the headphones

Recognizing the lights and tones

Bluetooth Indicator

Bluetooth indicator

Battery indicator

Color Indicates:

Purple (blinking) The headphones are discoverable for pairing.

Blue (blinking) The headphones are attempting to connect to a Bluetooth device.

Blue (solid) The headphones are connected to the Bluetooth device.

Battery Indicator

Color Indicates:

Green (solid) 1/2 to 7 hours remaining battery time

Amber (solid) Less than 1/2 hour remaining battery time

Red (blinking) Recharge headphones now

Amber (blinking) Headphones are charging

Green (while charging) Headphones are fully charged

Audio Tones

Tone Indicates:

Two ascending tones Headphones are discoverable

Three ascending tones Headphones are connected to a device

Four ascending tones Power on

Four descending tones Power off

Three descending tones Wireless connection ended

Single tone Low battery warning

Two descending tones Incoming call

Playback and phone call actions

Audio/video playback actions Headphones control

Play or pause Press Multi-function once

Track forward Double press Multi-function

Track back Triple press Multi-function

Adjust the volume Press Volume + or Volume -

Fast forward Press, then press and hold Multi-function

Rewind Double press, then press and hold Multi-function

Phone call actions Headphones control

Answer or end a call Press Multi-function once

Ignore a call Press and hold Multi-function

Answer second call Press Multi-function

Ignore second call Press and hold Multi-function

Activate voice control Press and hold Multi-function

Multiple device actions Headphones control

Pause audio on primary device and answer call on second device

Press Multi-function once

Ignore incoming call on second device and restart audio on primary device

Press and hold Multi-function

English - 9

Using the headphones

Using the optional audio cable Your SoundLink around-ear Bluetooth headphones come with a 3.5 mm audio cable that is compatible with most music sources. Use the audio cable when:

The desired audio source is not Bluetooth technology enabled.

The headphones battery is not charged.

You are in an area where Bluetooth connectivity is prohibited.

To attach the audio cable 1. Slide the power switch to off.

2. Remove the Bluetooth control module from the headphones by gently pulling it straight out.

3. Insert the audio cable plug (A) into the connector on the headphones until fully seated.

4. Insert the audio cable plug (B) into the 3.5 mm headphone connector on your audio source until fully seated.

A

B

Reference

10 - English

Maintenance

Battery care Be sure to turn off the headphones when it is not in use. Before storing the headphones for more than a few months, be sure the battery is fully charged.

Cleaning the headphones The Bose SoundLink around-ear Bluetooth headphones does not require scheduled cleaning. Should cleaning be necessary, simply wipe the outside surfaces with a soft, dry cloth. Do not allow moisture to get inside the earcups or the audio input connector. Do not use liquids or sprays.

Replacement parts and accessories Replacement parts and accessories can be ordered through Bose Customer Service. See the contact information for your area included in this guide.

Part Name Part Product Code

Carry bag 329585-0010

Replacement cushion kit 329586-0010

USB charging cable 330816-0010

Audio cable (3.5 mm) 329583-0010

Wall charger 329341-0010

Wall charger plus adapter 329342-0010

Reference

English - 11

Reattaching earcup cushions The earcup cushions are held in place by a mounting flange which snaps under eight small tabs located a ound the inside rim of each earcup. If an earcup cushion becomes partially or completely detached, push the mounting flange of the ea cup cushion back into the earcup. Using your finger or thumb, p ess around the edge of the mounting flange, making su e it snaps in place all the way around the earcup.

Troubleshooting

Problem What to do

The headphones do not charge When charging, make sure both ends of the USB cable are firmly connected If you are using a power outlet, be sure the power supply is securely plugged in and the outlet is working. If you are using your computer, be sure the computer is plugged in and the USB port is powered. If solid red Indicator appears, the headphone temperature is too hot or cold. Return to room temperature

conditions before charging. Turn headphone on and then off. Disconnect and reconnect the USB charging cable.

The headphones and the Bluetooth device do not pair

Make sure the headphones are not connected to the charger and the power switch is on. Turn the device off, then on again. Turn on the Bluetooth feature on the device. Turn off the Bluetooth feature on any other device that is paired with the headphones. Clear the paired device list from the headphones by pressing and holding Multi-function and Volume -

for 10 seconds. See To pair the headphones with your device on page 6. Try pairing with a different device to ensure the headphones are working properly.

The headphones and the Bluetooth device do not connect

Make sure the headphones are not connected to the charger and the power switch is on. Make sure the Bluetooth feature on the device is on. Make sure the headphones are within range of the device: up to 33 feet (10 m). Turn off the Bluetooth feature on any other device that is paired with the headphones Turn the headphones off, then on again, the headphones should automatically connect to the device. If it

does not automatically reconnect, select Bose AE SoundLink in the devices pairing list. Power the device off, then on again. Try connecting to a different paired device to be sure the headphones are working properly.

No audio or poor audio quality from a streaming audio source/application

Make sure the streaming audio source is on and playing. Make sure the audio device supports A2DP audio streaming. Try another streaming audio source/application or try another track. Make sure the devices Bluetooth volume is turned up and not muted. Move the device closer to the headphones (33 feet or 10 m). Move the device and headphones away from any device that could cause interference, such as another

Bluetooth device, cordless phones, a microwave oven, or a wireless computer network router. Reduce the number of applications that are running on your device. Disabling Wi-Fi functionality on the

device may also improve audio quality.

No audio or poor audio quality from a connected device

If using a Bluetooth device, ensure that the control module is firmly connected to the headphones If using the 3.5 mm audio cable, ensure both ends of the audio cable are firmly seated Try another music application or try another track. Try a different audio device. Make sure both ear cushions are firmly secu ed.

Audio does not match video Try another streaming audio device or application or try another track. Some delay is expected from some sources or applications.

Mis-shaped cushion The high-density earcup foam will regain its shape after a few minutes in a neutral position.

Reference

12 - English

Problem What to do

Short battery life Fully charge the headphones. When fully charged, the battery indicator will glow solid green (while on the charger).

When fully charged, your SoundLink around-ear Bluetooth headphones will provide approximately 7 hours of wireless audio or approximately 200 hours of standby time.

Disable tones and notifications in your device that may be f equently sent to the headphones. Be aware that some devices may drain the headphones battery more quickly than others. See page 5 of this document for more information on understanding battery performance.

Customer service Or for online support visit: owners.Bose.com (in the U.S.) or global.Bose.com (outside the U.S.).

To contact Bose by phone, refer to the address list included in the product carton.

For additional help in solving problems, contact your Bose dealer.

Limited Warranty Your Bose SoundLink around-ear headphones are covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights.

To obtain Limited Warranty service Return the product, with proof of purchase from an authorized Bose dealer, as follows:

Contact Bose support in your country/region (visit Global.Bose.com for contact information in your country/region) for specific eturn and shipping instructions.

Label and ship the product, freight prepaid, to the address provided by Bose support in your country.

Place any necessary Return Authorization Number prominently on the outside of the carton. Cartons not bearing a Return Authorization Number, where required, will be refused.

The serial number can be found on the inside of the left earcup or on the original carton.

Technical information Temperature ranges:

Operate this product within the temperature range of -4F to 113F (-20C to 45C) only.

Store this product within the temperature range of -4F to 113F (-20C to 45C) only.

Charge the battery where the temperature is between 41F and 104F (5C and 40C) only.

Battery: Rechargeable, non-replaceable lithium-ion polymer.

Charging time: 3 hours for full charge.

Operating time: Approximately 7 hours.

Operating range: Up to 33 feet (10 m) from device.

Bluetooth Version 4.0

Profiles include: Headphones (HSP 1.1); Hands F ee (HFP 1.5); Advanced Audio Distribution Profile (A2DP 1.2); Audio/ ideo Remote Control Profile ( VRCP 1.4).

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.

2017 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM