Bose Solo 5 TV v2 Owner's Guide

Owners Guide

Brugervejledning

Bedienungsanleitung

Gebruikershandleiding

Gua del usuario

Kyttohje

Notice dutilisation

Manuale di istruzioni

Kezelsi tmutat

Brukerveiledning

Podrcznik uytkownika

Manual do Proprietrio

Bruksanvisning

BOSE SOLO 5 TV SOUND SYSTEM

2 - E N G L I S H

I M P O R TA N T S A F E T Y I N S T R U C T I O N S

Please read and keep all safety and use instructions. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance

Important Safety Instructions 1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

E N G L I S H - 3

I M P O R TA N T S A F E T Y I N S T R U C T I O N S

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions in this guide.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Do NOT expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus.

Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.

Do NOT make unauthorized alterations to the product.

Do NOT use a power inverter with this product.

Do NOT use in vehicles or boats.

The speaker wire and interconnect cables included with this system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in-wall installation.

Use this product only with the power supply provided.

Where the mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

The batteries provided with this product may present a risk of fire or chemical burn if mishandled.

Do NOT expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).

Only use the mounting hardware supplied with this product.

Do NOT mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a qualified professional installer. Ensure the bracket is installed according to local building code.

Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as in a wall cavity or in an enclosed cabinet.

4 - E N G L I S H

R E G U L ATO R Y A N D L E G A L I N F O R M AT I O N

NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the users authority to operate this equipment.

This device complies with part 15 of the FCC Rules and ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

CAN ICES-3(B)/NMB-3(B)

This device complies with FCC and ISED Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Model: 418775

For Europe:

Frequency band of operation 2400 to 2483.5 MHz.

Maximum transmit power less than 20 dBm EIRP.

Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per applicable regulations.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Management Regulation for Low-power Radio-frequency Devices Article XII According to Management Regulation for Low-power Radio-frequency Devices without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

E N G L I S H - 5

R E G U L ATO R Y A N D L E G A L I N F O R M AT I O N

Product Power State Table The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.

Required Power State Information Power Modes

Standby Networked Standby

Power consumption in specified power mode, at 230V/50Hz input

0.5 W N/A*

Time after which equipment is automatically switched into mode

< 2.5 hours N/A*

Power consumption in networked standby if all wired network ports are connected and all wireless network ports are activated, at 230V/50Hz input

N/A N/A*

Network port deactivation/activation procedures. Deactivating all networks will enable standby mode.

Bluetooth: Deactivate by clearing the pairing list by pressing and holding the Bluetooth button for 10 seconds. Activate by pairing with a Bluetooth source.

*product does not utilize a networked standby mode for a Bluetooth connection and does not have the ability to be configured to a network via Wi-Fi or Ethernet

External Power Supply Technical Information The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission Regulation (EU) 2019/1782.

Manufacturer Bose Products B.V.

Commercial registration number 36037901

Address Gorslaan 60

1441 RG Purmerend

The Netherlands

Model identifier DT20V-1.8C-DC

Input voltage 100V-240V

Input AC frequency 50Hz/60Hz

Output voltage 20V DC

Output current 1.8A

Output power 36W

Average active efficiency 89.0%

Efficiency at low load (10%) 88.3%

No-load power consumption 0.08W

Please dispose of used batteries properly, following local regulations. Do not incinerate.

6 - E N G L I S H

R E G U L ATO R Y A N D L E G A L I N F O R M AT I O N

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements

Part Name Lead (Pb)

Mercury (Hg)

Cadmium (Cd)

Hexavalent (CR(VI))

Polybrominated Biphenyl

(PBB)

Polybrominated diphenylether

(PBDE) PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.

Taiwan Restriction of Hazardous Substances Table Equipment name: Bose Solo, Type designation: 410376

Restricted substances and its chemical symbols

Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent

chromium (Cr+6) Polybrominated biphenyls (PBB)

Polybrominated diphenyl ethers (PBDE)

PCBs - Metal Parts - Plastic Parts Speakers - Cables - Note 1: indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The indicates that the restricted substance corresponds to the exemption.

E N G L I S H - 7

R E G U L ATO R Y A N D L E G A L I N F O R M AT I O N

Please complete and retain for your records The serial and model numbers are located on the bottom of the soundbar and on the packaging for the remote control.

Serial number: ______________________________________________________________________

Model number: ______________________________________________________________________

Please keep your receipt with your owners guide. Now is a good time to register your Bose product. You can easily do this by going to global.Bose.com/register

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; 0 is 2010 or 2020.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Phone Number: +886-2-2514 7676

Mexico Importer: Bose de Mxico, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 Mxico, D.F. Phone Number: +5255 (5202) 3545

The CMIIT ID is located on the back panel product label.

California: Contains lithium ion battery with Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

8 - E N G L I S H

R E G U L ATO R Y A N D L E G A L I N F O R M AT I O N

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.

Blu-ray Disc and Blu-ray are trademarks of the Blu-ray Disc Association.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Bose Corporation Headquarters: 1-877-230-5639

2020 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.

E N G L I S H - 9

C O N T E N T S

Introduction About your TV sound system ....................................................................................... 11

System features .......................................................................................................... 11

Unpacking ............................................................................................................................. 12

Setting up the System Placing the soundbar ....................................................................................................... 13

Sample soundbar placement ................................................................................ 13

Wall mounting the soundbar ......................................................................................... 13

Cable options ...................................................................................................................... 14

Connecting your TV .......................................................................................................... 14

Connecting the soundbar ............................................................................................... 15

Option 1: Optical cable (preferred) ..................................................................... 15

Option 2: Coaxial cable ........................................................................................... 16

Connecting to power ........................................................................................................ 17

Mounting ring .............................................................................................................. 17

Turning off your TV speakers ........................................................................................ 18

Powering on your soundbar .......................................................................................... 18

Confirming your TV speakers are off ................................................................. 18

Using the System Remote control buttons .................................................................................................. 19

Programming the universal remote ............................................................................ 20

Customizing the power button ............................................................................ 21

Resyncing your cable/satellite box and TV ............................................................. 21

Switching between sources ........................................................................................... 22

Function buttons ................................................................................................................ 22

Adjusting the volume ....................................................................................................... 22

Adjusting the bass level .................................................................................................. 22

Resetting the bass level .......................................................................................... 23

Dialogue mode .................................................................................................................... 23

Auto-wake ............................................................................................................................ 23

Programming a non-Bose remote control ............................................................... 23

1 0 - E N G L I S H

C O N T E N T S

Bluetooth Pairing a Bluetooth device............................................................................................ 24

Connecting to a paired Bluetooth device ............................................................... 25

Switching between connected devices..................................................................... 25

Clearing the soundbars Bluetooth pairing list ..................................................... 25

Getting System Information Soundbar indicators ......................................................................................................... 26

Status indicator .......................................................................................................... 26

Bluetooth indicator.................................................................................................. 26

Alternate Setup No sound from a source(s) connected to your TV ............................................... 27

No optical or coaxial connector on your TV ........................................................... 27

Connect Bose Products Connect to a Bose Home Speaker or Soundbar ................................................... 33

Compatible products ............................................................................................... 33

Connect using the Bose Music app .................................................................... 33

Reconnect to a Bose Home Speaker or Soundbar ............................................... 34

Care and Maintenance Troubleshooting ................................................................................................................. 35

Adjusting the audio for wall mounting.............................................................. 37

Replacing the remote batteries .................................................................................... 37

Cleaning ................................................................................................................................. 38

Customer service ............................................................................................................... 38

Limited warranty ................................................................................................................ 38

Technical Information ....................................................................................................... 38

E N G L I S H - 1 1

I N T R O D U C T I O N

About your TV sound system Your TV sound system provides clear, spacious sound from one compact soundbar.

System features Videostage and TrueSpace technologies deliver many of the benefits of a

five-speaker home theater in a single soundbar.

Sleek and elegantly designed soundbar fits easily in front of your TV.

Connects with just one audio cable for easy setup.

Programmable universal remote powers on/off your TV, cable/satellite box and system with the press of a single button.

Stream music from Bluetooth devices.

Stores up to eight Bluetooth devices in its pairing list.

Connects up to two Bluetooth devices for easy switching between devices.

Mounting ring to hide the power supply behind your mounted TV.

Soundbar can be mounted on the wall (kit available separately).

1 2 - E N G L I S H

I N T R O D U C T I O N

Unpacking Carefully unpack the carton and confirm that the following parts are included:

Soundbar Power supply and cord*

Optical cable Coaxial cable

(Europe only) Universal remote control (batteries provided)

*May ship with multiple power cords. The appropriate power cord for your region is supplied.

Note: If part of the system is damaged, do not use it. Contact your authorized Bose dealer or Bose customer service. Refer to the contact sheet in the carton.

E N G L I S H - 1 3

S E T T I N G U P T H E S YS T E M

Placing the soundbar Stand the soundbar on its feet in front of your TV.

Do not place your TV on the soundbar.

Make sure there is an AC (mains) power outlet nearby.

To avoid wireless interference:

Keep other wireless equipment away from the soundbar.

Place the soundbar outside of and away from metal cabinets, other audio/video components and direct heat sources.

Sample soundbar placement

Wall mounting the soundbar You can mount the soundbar on a wall. To purchase the WB-120 Wall Mount Kit, contact your local Bose dealer or visit www.Bose.com

After wall mounting and setting up the soundbar, adjust the audio for better bass sound (see page 37).

CAUTION: Do not use any other hardware to mount the soundbar.

1 4 - E N G L I S H

S E T T I N G U P T H E SYS T E M

Cable options Connect your TV to the soundbar using one of the two digital cable options. The optical cable is the preferred method for connection.

Note: If your TV does not have an optical or coaxial connector, see Alternate Setup on page 27.

1. On the back of your TV, locate the Audio OUT (digital) connector panel.

Note: You must connect the audio cable through your Audio OUT connector panel.

Option 1: Optical cable (digital audio) Preferred method for connection.

Option 2: Coaxial cable (digital audio) Use if no optical output is available.

Your TV's connector panel may not appear as shown. Look for the shape or color (coaxial) of the connector.

2. Choose an audio cable.

Connecting your TV Insert one end of the audio cable into the correct Audio OUT (digital) connector on your TV.

CAUTION: If using an optical cable, remove the protective caps from both ends. Inserting the plug in the wrong orientation can damage the plug and/or the connector.

E N G L I S H - 1 5

S E T T I N G U P T H E SYS T E M

Connecting the soundbar After connecting the audio cable to your TV, connect the other end to your soundbar. Use only one audio cable.

For instructions on connecting a coaxial cable, see page 16.

Option 1: Optical cable (preferred) CAUTION: Ensure you have removed the protective cap from both ends of the optical

cable. Inserting the plug in the wrong orientation can damage the plug and/or the connector.

1. Hold the optical cables plug with the Bose logo facing down.

2. Align the plug with the Optical connector on the soundbar and insert the plug carefully.

Hinged door

Note: The connector has a hinged door that swings inward when inserting the plug.

3. Firmly push the plug into the connector until you hear or feel a click.

AUX

Optic al

Coaxial

Power

TV In put

1 6 - E N G L I S H

S E T T I N G U P T H E SYS T E M

Option 2: Coaxial cable Insert the other end of the coaxial cable into the Coaxial connector on the soundbar.

E N G L I S H - 1 7

S E T T I N G U P T H E SYS T E M

Connecting to power 1. Plug the power supply into the Power connector.

1

2

3

Mounting ring

2. Plug one end of the power cord into the power supply.

3. Plug the other end into a live AC power (mains) outlet.

The soundbar emits a tone.

Mounting ring To hide the power supply behind your mounted TV, use the mounting ring. Attach the mounting ring to your TVs wall mount using zip ties or bread ties (not provided).

1 8 - E N G L I S H

S E T T I N G U P T H E SYS T E M

Turning off your TV speakers To avoid hearing distorted sound, turn off your TV speakers.

Refer to your TVs owners guide for more information.

Powering on your soundbar 1. Power on your TV.

2. If you are using a cable/satellite box or other secondary source, power on the source.

3. Press the Power button ( ) on the remote control.

The status indicator glows green.

Status indicator

4. Check if sound is coming from the soundbar.

Note: If you do not hear sound coming from the soundbar, see Troubleshooting on page 35.

Confirming your TV speakers are off 1. Press the Mute button ( ) on the soundbars remote control.

2. Check that no sound is coming from your TV.

Note: If you hear sound coming from your TV, see Troubleshooting on page 35.

E N G L I S H - 1 9

U S I N G T H E S YS T E M

Remote control buttons Use the remote to control sources connected to your system, adjust the system volume, change channels, use playback functions, enable cable/satellite box functions and navigate source menus.

Navigation pad

Source selection

Lists recorded DVR programs

Displays the Internet TV home page

Closed captioning

Selects a source connected to your TV

Function buttons (see page 22)

Bass controls

Playback controls

Powers on/off the soundbar

Powers on/off a selected source

Previous channel, chapter or track

Teletext mode

Volume controls Dialogue mode

controls the Bluetooth feature

2 0 - E N G L I S H

U S I N G T H E SYS T E M

Programming the universal remote You can program the universal remote to control your source, such as a TV, DVD/Blu-ray Disc player, cable/satellite box, game system or DVR, by entering the code for your sources brand. There may be several codes for your source. You may need to perform this procedure multiple times to locate the correct code.

Locate your sources code

1. Power on your source.

2. Locate the code for your sources brand in the Universal Remote Device Codes book (provided).

Enter your sources code

1. On the remote control, press and hold the appropriate source button until all six source buttons glow, then release.

For example, to program your TV, press and hold until all six source buttons glow, then release.

The appropriate source button continues to glow.

2. On the number keypad, enter the code for your sources brand and press on the volume button.

Test your sources code

1. Test your source for basic functions. Follow the instructions for your source:

TV: press the channel buttons. Press . The settings menu appears. Press and to navigate.

Cable/satellite box: press . The programming guide appears. Press and to navigate.

DVD or Blu-ray Disc player: press . The settings menu appears. Press and to navigate.

Game system: press and to navigate through your menu.

E N G L I S H - 2 1

U S I N G T H E S YS T E M

2. Based on your sources response to basic functions:

Remote responds accurately: press to exit programming and save your settings.

Remote does not respond or does not respond accurately:

If your source button glows: press on the volume button to move to the next code. Repeat steps 1 - 2 in Test your sources code. You may need to repeat this procedure 30 or more times. If all six buttons blink three times, you have cycled through all codes for your source.

If your source button is off: your remote exited programming mode. Repeat steps 1 - 2 in Enter your sources code and steps 1 - 2 in Test your sources code.

Tip: After you exit programming mode, press the appropriate source button to use your source.

Note: Your source may not be compatible with universal remote controls or may not accept IR (infrared) signals. Refer to your sources owners guide for more information.

Customizing the power button You can customize (power button) on your remote to power on/off your soundbar, TV and cable/satellite box simultaneously.

1. Program your remote to control your TV and cable/satellite box (see page 20).

2. Press and simultaneously and hold for 10 seconds.

Both buttons flash three times.

Resyncing your cable/satellite box and TV After customizing the power button, your cable/satellite box and TV may become out of sync and not power on/off simultaneously. Use the following steps to resync your soundbar.

1. Press the source button for the source that is out of sync.

2. Press to power on/off the source.

3. Press . Your sources power on/off simultaneously.

2 2 - E N G L I S H

U S I N G T H E SYS T E M

Switching between sources You can switch from one source to another by pressing the appropriate source button on the remote.

Note: Before you begin, ensure you have correctly programmed your sources.

1. Press the button for the source you want to control.

The source button glows.

2. Press .

The source powers on.

3. Press and select the correct input on your TV.

Function buttons The red, green, yellow and blue buttons on the remote control correspond with the color-coded function buttons on your cable/satellite box or teletext functions.

Cable/satellite box functions: refer to your cable/satellite boxs owners guide.

Teletext functions: correspond with color-coded page numbers, headings or shortcuts on a teletext display.

Adjusting the volume On the remote control:

Press to increase the volume.

Press to decrease the volume.

Press to mute or unmute the audio.

Note: If you hear sound coming from your TV, see Troubleshooting on page 35.

Adjusting the bass level 1. Press the Bass button ( ).

The status indicator blinks white three times.

2. On the remote control:

Press to increase the bass.

Press to decrease the bass.

E N G L I S H - 2 3

U S I N G T H E S YS T E M

3. Press the Bass button ( ).

The status indicator blinks white three times and the soundbar saves your settings.

Note: For optimal sound quality for dialogue-only programs, such as news and talk shows, see Dialogue mode.

Resetting the bass level On the remote control, press and hold for five seconds to reset the bass level to original factory settings.

The status indicator blinks white three times and remains solid white. The soundbar returns to original factory settings.

Dialogue mode Dialogue mode provides optimal sound quality for dialogue-only programs, such as news and talk shows, by decreasing the soundbars bass settings.

Press the dialogue button ( ) to toggle between dialogue mode and your default audio settings.

The status indicator glows amber when dialogue mode is enabled.

Auto-wake You can set the soundbar to power on whenever a sound signal is received.

Note: The soundbar powers off after 60 minutes of inactivity.

Press and hold on the remote for five seconds until you hear a tone to toggle between auto-wake and default power settings.

The status indicator glows dim amber when the soundbar is off and auto-wake is enabled.

Programming a non-Bose remote control You can program a non-Bose remote control, such as your cable/satellite box remote, to control the soundbar. Refer to your non-Bose remote controls owners guide or cable/satellite website for instructions.

Once programmed, the non-Bose remote performs basic functions such as power on/off and volume.

2 4 - E N G L I S H

BLUETOOTH

Pairing a Bluetooth device Bluetooth wireless technology enables you to stream music from Bluetooth smartphones, tablets, computers or other audio devices to the soundbar.

Before you can stream music from a Bluetooth device, you must pair your device with the soundbar.

1. On the remote control, press and hold the Bluetooth button until the Bluetooth indicator blinks blue.

Make sure the Bluetooth indicator blinks blue before you pair your device.

2. On your Bluetooth device, turn on the Bluetooth feature.

Tip: The Bluetooth feature is usually found in Settings. A gear icon ( ) often represents Settings on the Home screen.

3. Select Bose Solo 5 system from your device list.

Once paired, the Bose Solo 5 system appears connected in the device list.

4. On your Bluetooth device, play music to stream to your soundbar.

If you cannot pair your device

You may need to clear the soundbars Bluetooth pairing list (see page 25). After you clear the list, try pairing again.

See Troubleshooting on page 35 for more information.

E N G L I S H - 2 5

BLUETOOTH

Connecting to a paired Bluetooth device You can stream audio from a Bluetooth device to the soundbar.

Note: If there are multiple devices stored in the soundbars pairing list, it may take a minute or two for the paired device to connect. The soundbars Bluetooth indicator shows connection status (see page 26).

1. On the remote control, press .

The soundbar connects to the last two devices that streamed to your soundbar.

2. Once connected, on the Bluetooth device, play music.

If you cannot stream audio from a paired device The soundbar may have lost connection to your device. Check the soundbars Bluetooth indicator. If the paired device is out of range of the soundbar, move your device within range.

Switching between connected devices The soundbar supports multi-point connectivity, which allows you to seamlessly switch playing music between connected devices.

The last two devices that streamed to the soundbar remain connected. During playback, you can pause audio on the streaming device, and then play music from another connected device.

1. Pause music from the streaming device.

2. On another connected device, play music.

3. Repeat steps 1 and 2 to switch between connected devices.

Clearing the soundbars Bluetooth pairing list When you pair a Bluetooth device to the soundbar, the connection is stored in the soundbars pairing list. You may need to clear the pairing list if you cannot connect to a device. Once you clear the list, you need to pair the device again.

1. Press and hold for 10 seconds, until the Bluetooth indicator blinks blue.

2. On your mobile device, delete Bose Solo 5 system from the Bluetooth menu.

The soundbar emits a tone and is ready to pair to a device (see page 24).

2 6 - E N G L I S H

G E T T I N G SYS T E M I N F O R M AT I O N

Soundbar indicators The status and Bluetooth indicators on the front of the soundbar provide information on soundbar activity.

Status indicator

Bluetooth indicator

Status indicator

Indicator activity System state Off Soundbar off (standby)

Green Solid: Soundbar is on

Blinking: Soundbar is muted

Amber Dim: Standby, auto-wake is enabled

Solid: Dialogue mode

Blinking: Dialogue mode, Soundbar is muted

Red System error: Call Bose Customer Service. Refer to the contact sheet in the carton.

Bluetooth indicator

Indicator activity System state Blue Blinking: ready to pair

White Blinking: Connecting

Solid: Connected

E N G L I S H - 2 7

A LT E R N AT E S E T U P

You may need to use an alternate setup method for the following reasons:

No sound from a source(s) connected to your TV.

No optical or coaxial connector on your TV.

No sound from a source(s) connected to your TV Some TVs do not deliver sound from connected sources to the soundbar. Use an alternate setup method to directly connect your source(s) to the soundbar.

Problem What to do No sound from a source connected to your TV Connect your source to the soundbar using

one of the two cable options. (See page 28.)

No sound from two sources connected to your TV

Connect your sources to the soundbar using Option 1 or Option 2. (See page 30.)

No optical or coaxial connector on your TV Some TVs do not have optical or coaxial connectors. Use an alternate setup method to connect your TV to the soundbar.

Problem What to do TV only has an analog connector Connect your TV using a 3.5 mm to RCA stereo

cable (not provided). (See page 29.)

TV only has a headphones connector Connect your TV using a 3.5 mm stereo cable (not provided). (See page 32.)

TV has no audio outputs Use the audio outputs on another source, such as a cable/satellite box to connect to the soundbar. (See page 28.)

2 8 - E N G L I S H

A LT E R N AT E S E T U P

Connecting a source to the soundbar

If you do not get sound from a source, such as a DVD/Blu-ray Disc player, cable/ satellite box, game system or DVR, connected to your TV, connect it to the soundbar. Use only one audio cable.

CAUTION: If using an optical cable, remove the protective caps from both ends. Inserting the plug in the wrong orientation can damage the plug and/or the connector.

1. On the back of your source, locate the Audio OUT (digital) connector panel.

Soundbar connector panel

Audio OUT Source connector panel

2. Choose an audio cable.

3. If you have not already, disconnect your TV from the soundbar.

4. Connect the audio cable from your cable/satellite boxs Audio OUT (digital) connector panel to the soundbar.

Note: Do not disconnect your sources video cable, such as an HDMI cable, from your TV.

E N G L I S H - 2 9

A LT E R N AT E S E T U P

Connecting a sources analog connector to the soundbar

If your source does not have an optical or coaxial connector, and only has analog connectors (red and white), use a 3.5 mm to RCA stereo cable (not provided) to connect to the soundbar.

1. If you have not already, disconnect your TV from the soundbar.

2. Insert the RCA analog cable into the Audio OUT RCA (red and white) connectors on your source.

3. Insert the stereo plug into the soundbars AUX connector.

3.5 mm to RCA stereo cable (not provided)

Soundbar connector panel

Audio OUT Source connector panel

3 0 - E N G L I S H

A LT E R N AT E S E T U P

Connecting two sources to the soundbar

If you do not get sound from any source, such as a DVD/Blu-ray Disc player, cable/satellite box, game system or DVR, connected to your TV, connect it to the soundbar. Use only one audio cable for each source.

1. On the back of each source, locate the Audio OUT (digital) connector panel.

2. Choose a separate audio cable for each source using either Option 1 or Option 2 (see page 31).

Note: You MUST use either Option 1 or Option 2. Do not use the coaxial cable and optical cable at the same time.

3. If you have not already, disconnect your TV from the soundbar.

4. Separately connect the chosen audio cable from each sources Audio OUT (digital) connector panel to the soundbar.

Note: Do not disconnect your sources video cable, such as an HDMI cable, from your TV.

Option 1

This figure shows two source connections using an optical cable and 3.5 mm to RCA stereo cable (not provided).

CAUTION: If using an optical cable, remove the protective caps from both ends. Inserting the plug in the wrong orientation can damage the plug and/or the connector.

3.5 mm to RCA stereo cable (not provided)

Audio OUT Source 2Audio OUT Source 1

Soundbar connector panel

E N G L I S H - 3 1

A LT E R N AT E S E T U P

Option 2

This figure shows two source connections using a coaxial cable and 3.5 mm to RCA stereo cable (not provided).

Audio OUT Source 2

Audio OUT Source 1

Soundbar connector panel

3.5 mm to RCA stereo cable (not provided)

Using two sources connected to the soundbar Power off sources when not in use. In order for one source to deliver audio to the sound- bar, your other source must be off.

3 2 - E N G L I S H

A LT E R N AT E S E T U P

Connecting a TV headphones connector to the soundbar

If your TV only has a headphones connector, use a 3.5 mm stereo cable (not provided) to connect it to the soundbar.

1. Insert the stereo plug into the TV headphones connector.

2. Insert the other end of the cable into the AUX connector on your soundbar.

3. Ensure your TV speakers are on. Refer to your TVs owners guide for more information.

4. To ensure optimal volume control from your soundbar,

Set your TVs volume to 75 percent of maximum.

Next, set the volume level of your soundbar using the remote control.

3.5 mm stereo cable (not provided)

Soundbar connector panel

Audio OUT TV headphones connector panel (or other variable audio output)

E N G L I S H - 3 3

C O N N E C T B O S E P R O D U C T S

Connect to a Bose Home Speaker or Soundbar With Bose SimpleSync technology, you can connect your Bose Solo 5 TV sound system to a Bose Home Speaker or Bose Soundbar to listen to the same song in two different rooms at the same time.

Note: SimpleSync technology has a Bluetooth range of 30 ft (9 m). Walls and construction materials can affect reception.