Bose Acoustic Wave Music System 5-CD Changer Owner's Guide
![Bose Acoustic Wave Music System 5-CD Changer manual cover](/images/DzZgGCnVwDFWLuFxZAKZannK/thumbs/thumb175x175.webp)
To connect your Bose Acoustic Wave Music System to your TV, use an audio cable with RCA connectors. Connect the audio output of your TV to the AUX input of the music system. Ensure both devices are powered off when making connections.
If the CD changer is not reading discs, try cleaning the discs and the CD lens with a soft, lint-free cloth. If the problem persists, perform a power reset by unplugging the system for a few minutes.
The Bose Acoustic Wave Music System 5-CD Changer can play standard audio CDs and some MP3 CDs, depending on the format. Ensure your MP3 CDs are properly formatted and finalized.
To reset the system to factory settings, press and hold the Stop/Eject button on the CD changer for about 10 seconds until the display resets.
Ensure the volume is turned up and not muted. Check all cable connections and try switching to a different audio source. If the problem persists, perform a power reset.
Use a soft, dry cloth to clean the exterior. Avoid using chemicals or solvents. Clean the CD lens with a CD lens cleaner periodically to ensure optimal performance.
Yes, you can connect a Bluetooth adapter to the AUX input of the Bose Acoustic Wave Music System, allowing you to stream audio wirelessly from Bluetooth-enabled devices.
If the system randomly turns off, check the power connections and ensure the power outlet is working. It might also be due to overheating, so ensure the system is placed in a well-ventilated area.
To set the clock, press and hold the Time button until the clock begins flashing. Use the Tune/Seek buttons to set the correct time, then press Time again to confirm.
The remote control provided with the Bose Acoustic Wave Music System is designed specifically for the system and cannot be used to control other devices.