Bose 501 Series III Direct Reflecting Loudspeaker System Owner's Guide
![Bose 501 Series III Direct Reflecting Loudspeaker System manual cover](/images/swhCMqqJwqGTDcnulWiYhIOh/thumbs/thumb175x175.webp)
Place the speakers at least 12 inches from the wall, with the reflective panels facing away from the listening area. This setup utilizes the direct/reflecting design to enhance sound quality.
Check the speaker wire connections on both the speaker and the amplifier or receiver. Ensure the wires are securely connected and not damaged. Test with a different speaker cable if possible.
Use a soft, dry cloth to wipe the exterior surfaces. Avoid using any liquids, and do not apply any cleaner directly to the speaker.
Yes, as long as the amplifier or receiver can handle the 8-ohm impedance and supports the power output recommended for these speakers.
Regularly dust the speakers and check for any loose connections. Periodically inspect the speaker cones for any signs of damage or wear.
Connect the speaker wires from the receiver's speaker outputs to the terminals on the Bose 501 speakers, ensuring correct polarity.
Reduce the volume to prevent damage to the speakers. Verify that the amplifier is not overdriven and check the speaker wiring for any issues.
Experiment with speaker placement and room acoustics. Consider using a subwoofer for enhanced bass if needed.
Play a variety of music at moderate volume levels for about 20-40 hours to allow the speaker components to settle and achieve optimal sound quality.
Check all cable connections for secure and proper contact. Ensure there are no electrical interference sources nearby, such as fluorescent lights or other electronic devices.