Bosch Series 6 KAD93VIFPG Energy Label
![Bosch Series 6 KAD93VIFPG Refrigerator manual cover](/images/WUshbucyJHIwTLbpspcXfbVh/thumbs/thumb175x175.webp)
To adjust the temperature settings, press the “Fridge” or “Freezer” button on the control panel. Use the "+" or "-" buttons to set the desired temperature.
Check if the doors are closing properly and not blocked by items. Ensure that the vents inside are not obstructed and the temperature settings are correct.
Press the “SuperCool” button on the control panel. This function will automatically turn off after approximately 6 hours.
This model is equipped with a NoFrost system, so manual defrosting is not necessary. It automatically prevents ice build-up.
Locate the water filter at the bottom of the refrigerator. Turn it counterclockwise to remove, then rinse under running water. Replace by turning it clockwise until it locks.
Ensure the refrigerator is level. Check that the items inside are not vibrating and that the appliance is not touching the wall or other surfaces.
Unplug the refrigerator. Remove the light cover by gently prying it open. Replace the bulb with a new one of the same type and wattage. Reattach the cover.
After a power outage, the refrigerator should reset automatically. If not, unplug it for 5 minutes, then plug it back in.
Clean the condenser coils every 6 months, replace the water filter every 6 months, and check door seals regularly for cleanliness and integrity.
Press and hold the “Lock” button on the control panel for 3 seconds until the lock icon appears on the display.