Bosch Series 4 KGN397LDFG Energy Label

To adjust the temperature settings, press the 'Fridge' or 'Freezer' button on the control panel until you reach the desired temperature. The display will show the current set temperature.
Ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature settings, and ensure the doors are properly sealed. Clean the condenser coils if necessary.
This refrigerator model is frost-free and does not require manual defrosting. The automatic defrosting function will manage frost build-up.
Unusual noises can be due to the compressor, evaporator fan, or items inside the fridge rattling. Verify that the refrigerator is level and check for any loose items.
Remove the water filter from its compartment, rinse it under cold water, and replace it back into the compartment. Follow the manufacturer's instructions for proper maintenance.
The ideal temperature setting for the fridge is 4°C (39°F) and for the freezer is -18°C (0°F). Adjust the settings based on your specific storage needs.
Unplug the refrigerator, remove the light cover, and replace the bulb with a new one of the same type and wattage. Secure the light cover back and plug the refrigerator in.
Check if the refrigerator or freezer doors are fully closed. Ensure that the door seals are clean and not obstructed. If the issue persists, inspect the door switch for faults.
Ensure the refrigerator is placed away from heat sources, keep the doors closed as much as possible, and ensure the seals are intact. Regularly clean the condenser coils to maintain efficiency.
Use a soft cloth with mild detergent and warm water. Avoid abrasive cleaners and make sure to dry all surfaces thoroughly to prevent moisture build-up.