Bosch Series 4 DFS097A51B Energy Label

Bosch Series 4 DFS097A51B Hood manual cover
Pages 1
Year 2014
Language(s)
English en

Bosch Series 4 DFS097A51B Hood Specification

The Bosch Series 4 DFS097A51B hood is a sophisticated kitchen appliance designed to deliver efficient ventilation while seamlessly integrating into modern kitchen layouts. Engineered with a sleek telescopic design, this hood offers both functionality and aesthetic appeal. It features an energy-efficient operation, classified under energy efficiency class A, ensuring reduced energy consumption without compromising performance. The appliance provides a maximum extraction rate of 730 m³/h, effectively removing smoke, odors, and grease from the kitchen environment.

Equipped with a low-noise operation, it operates at a noise level of 41 dB on the lowest setting, making it one of the quieter options available, thus ensuring a peaceful cooking atmosphere. The hood is powered by a robust and durable EcoSilence Drive™ motor, which enhances the longevity and efficiency of the device. It includes LED lighting that provides bright and clear illumination of the cooking area while being energy-efficient.

The Bosch DFS097A51B offers intuitive controls with a touch control panel, allowing users to easily select from three power levels and an additional intensive setting for high-demand cooking sessions. The hood is designed for both ducted and recirculating configurations, providing flexibility in installation. It comes with a metal grease filter that is dishwasher safe, ensuring easy maintenance and optimal performance. The appliance dimensions are designed to fit seamlessly into standard kitchen cabinetry, making it a versatile choice for various kitchen styles. Overall, the Bosch Series 4 DFS097A51B hood combines cutting-edge technology with elegant design, making it a reliable choice for enhancing kitchen ventilation.

Bosch Series 4 DFS097A51B Hood F.A.Q.

How do I clean the filters of the Bosch Series 4 DFS097A51B hood?

To clean the filters, first remove them carefully. You can wash the metal grease filter in a dishwasher or by hand using warm soapy water. Ensure they are completely dry before re-installing.

What should I do if the hood is making unusual noises?

Unusual noises may be due to loose components or accumulation of debris. Check for loose screws and ensure the filters are properly seated. Clean the fan and filters to remove any debris.

How can I improve the extraction performance of my Bosch hood?

Ensure that the ducting is not obstructed and is installed correctly. Regularly clean the filters and fan to maintain optimal airflow.

What are the recommended maintenance intervals for the Bosch Series 4 DFS097A51B hood?

It is recommended to clean the grease filters every 1 to 2 months, depending on usage. The carbon filter, if used, should be replaced every 3 to 6 months.

How do I replace the light bulb in my Bosch hood?

To replace the bulb, turn off the hood and disconnect it from power. Remove the cover over the bulb, then carefully replace the bulb with a new one of the same type and wattage.

What type of ducting is recommended for the Bosch Series 4 DFS097A51B hood?

For optimal performance, use a duct with a diameter of 150 mm. Ensure it is as short and straight as possible to minimize air resistance.

Why is my Bosch hood not turning on?

If the hood does not turn on, check the power connection and ensure the unit is correctly plugged in. Also, inspect the fuse or circuit breaker to ensure they have not tripped.

How do I switch between recirculation and extraction modes?

To switch modes, install a carbon filter for recirculation and ensure proper ducting for extraction. The mode switch may also require repositioning or configuring on the hood's control panel.

What could cause the Bosch hood to have reduced suction power?

Reduced suction can be caused by clogged filters, blockages in the ductwork, or a faulty fan. Clean or replace filters and check the ducting for any obstructions.

How do I reset the filter indicator on my Bosch Series 4 hood?

To reset the filter indicator, press and hold the reset button on the control panel for a few seconds until the indicator light turns off.