Bosch Series 2 SMV2ITX22G Energy Label
![Bosch Series 2 SMV2ITX22G Dishwasher manual cover](/images/ienNFBOaxlQokbSOSZZwBLnr/thumbs/thumb175x175.webp)
To reset your Bosch Series 2 dishwasher, press and hold the start button for approximately 3 to 5 seconds until you hear a beep. This indicates that the reset process has been initiated.
First, check the filter and drain pump for any blockages. Clean them if necessary. Also, ensure that the drain hose is not kinked or clogged. If the issue persists, consult the manual or contact Bosch support.
It is recommended to clean the filter every 2-3 months, depending on usage, to maintain optimal performance.
Residue can be caused by using too much or too little detergent, hard water, or a dirty filter. Adjust the detergent amount, use a rinse aid, and clean the filter to resolve this issue.
Unusual noises can be caused by items in the dishwasher touching each other, a clogged spray arm, or a malfunctioning pump. Ensure items are properly loaded, clean the spray arms, and check for obstructions.
To improve drying performance, use a rinse aid, select a higher temperature wash cycle, and ensure the dishwasher is not overloaded.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, wiping the door seals, and descaling the dishwasher every few months.
Ensure there are no obstructions or misaligned racks. Check the door latch for damage and replace it if necessary. If the problem persists, consult a professional technician.
Refer to the user manual to identify the error code. Follow the recommended troubleshooting steps for that specific code. If unresolved, contact Bosch customer service for assistance.
No, you should not use regular dish soap in a dishwasher. It can create excessive suds and potentially damage the appliance. Always use dishwasher detergent specifically designed for dishwashers.