Bosch Series 2 KTL15NWFAG Energy Label
![Bosch Series 2 KTL15NWFAG Refrigerator manual cover](/images/pnWjYMDdkXFIzAoCWGKkXcPn/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control dial inside the refrigerator. Turn the dial clockwise to lower the temperature and counterclockwise to increase it. Allow 24 hours for the temperature to stabilize.
Ensure the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature setting and make sure the door seals are clean and not damaged. Ensure there is sufficient space around the unit for air circulation.
To defrost the freezer, remove all contents and unplug the refrigerator. Leave the door open and place towels to collect water. Once defrosted, clean the interior and plug the unit back in.
Use a mixture of mild detergent and warm water with a soft cloth. Avoid abrasive cleaners and always dry surfaces thoroughly to prevent moisture build-up.
It's recommended to clean the condenser coils every six months to maintain optimal performance. Use a vacuum cleaner or a soft brush to remove dust and debris.
Check if the refrigerator is level and not touching any surrounding surfaces. Ensure that items inside are not vibrating against each other. If the noise persists, contact a technician.
Inspect the door gasket for damage and ensure it's clean. Make sure the refrigerator is level and not overloaded, which can prevent the door from sealing correctly.
Unplug the refrigerator and locate the light cover inside. Remove the cover by pressing the release tab, then unscrew the old bulb. Replace with a new bulb of the same type and wattage, and reattach the cover.
It's best to allow hot food to cool to room temperature before placing it in the refrigerator. This helps maintain the internal temperature and reduces energy consumption.
Ensure the door seals are intact and close properly, keep the temperature settings optimal, avoid overloading, and place the refrigerator away from direct sunlight and heat sources.