Bosch Series 2 KSV36NWEPG Energy Label

To adjust the temperature, locate the control panel inside the fridge. Use the '+' and '-' buttons to set your desired temperature. The recommended setting is 4°C for optimal performance.
First, check if the door is fully closed and the seals are intact. Ensure there is enough space around the appliance for ventilation. If the problem persists, consider defrosting the unit or contacting Bosch customer support.
It is recommended to clean the condenser coils every 6 to 12 months to maintain efficiency and prevent overheating. Ensure the appliance is unplugged before cleaning.
Signs include visible cracks or tears in the seal, difficulty closing the door, and condensation or frost buildup inside the fridge. Replace the seal if any of these issues are present.
Keep the refrigerator away from heat sources and ensure it is well-ventilated. Avoid frequent door openings and ensure the door seals are intact. Set the temperature to the recommended setting.
Store raw meats on the lower shelves to prevent contamination. Use the crisper drawers for fruits and vegetables. Place dairy products and eggs on the middle shelves and keep beverages and condiments in the door compartments.
For manual defrosting, unplug the appliance and remove all items. Leave the freezer door open and place towels to absorb the melting ice. Once defrosted, clean and dry the interior before plugging the appliance back in.
This could be due to a blocked defrost drain. Check and clean the drain hole located at the back of the interior compartment. Ensure it is free of debris and that water can flow freely.
To change the light bulb, first unplug the refrigerator. Remove the cover of the light compartment, unscrew the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover before plugging the appliance back in.
Unusual noises can be due to the fridge being unlevel or items vibrating against each other inside. Ensure the fridge is stable and rearrange contents. If the noise persists, consult the user manual or contact Bosch support.