Bosch Series 2 KIR41NSE0G Energy Label
![Bosch Series 2 KIR41NSE0G Refrigerator manual cover](/images/adaAOGRyiaIgZSJWFYrvLyAh/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control panel inside the refrigerator compartment. Use the buttons to set your desired temperature. Typically, 3-4°C is recommended for the fridge section.
First, ensure that the door is closing properly and the seals are intact. Check if the temperature settings are correct. If the issue persists, verify that the vents inside the fridge are not blocked. If none of these steps help, consider contacting a service technician.
The Bosch Series 2 KIR41NSE0G is a frost-free model, so manual defrosting is not necessary. The fridge automatically defrosts itself.
To clean the interior, remove all food items and shelves. Use a solution of mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry thoroughly before replacing shelves and food.
Check if the refrigerator is level, as uneven placement can cause noise. Ensure that it is not in contact with any surrounding furniture. If the noise persists, it could be due to the compressor or fan, and professional service may be required.
The fridge uses LED lighting. If a bulb needs replacement, refer to the user manual for the specific part number and instructions, or contact Bosch customer service for assistance.
Store raw meat on the bottom shelf to prevent dripping onto other foods. Dairy products should be kept in the cooler zones, typically on the middle shelves. Keep fruits and vegetables in the designated crisper drawers.
Condensation can occur due to high humidity or if the door is frequently opened. Ensure the door seals are intact. If the issue persists, check if the fridge is set to an overly cold temperature, causing moisture to form on the exterior.
Ensure the fridge is not overfilled to allow air circulation. Keep the door closed as much as possible and ensure the seals are tight. Regularly clean the condenser coils to maintain efficient operation.
Check if the bulb needs replacement. If the light still doesn't work after replacing the bulb, inspect the door switch for any faults. If the issue persists, it may require professional servicing.