Bosch Series 2 KIL42NSE0G Energy Label

To adjust the temperature, locate the temperature control dial inside the refrigerator. Turn the dial to the desired setting. For best results, set the refrigerator to a mid-range temperature.
Unusual noises can be due to various reasons such as the refrigerator being unevenly placed, items inside vibrating, or normal operation sounds like the compressor kicking in. Ensure the fridge is level and not touching any walls, and check if the items inside are secure.
The Bosch Series 2 KIL42NSE0G has a NoFrost system, which eliminates the need for manual defrosting. However, if you notice frost buildup, check the door seals and ensure the door is closing properly.
First, check if the refrigerator is properly plugged in and receiving power. If the light still does not work, the bulb may need replacement. Consult your user manual for the correct bulb type and replacement instructions.
Remove the shelves and drawers from the refrigerator and wash them with mild soapy water. Rinse thoroughly and dry before placing them back in the refrigerator. Avoid using abrasive cleaners.
Ensure the temperature setting is correct and the door is sealing properly. Check for any obstructions in the air vents. If the problem persists, it may require professional service.
Changing the door direction involves several steps such as removing the door and hinges and reattaching them on the opposite side. It is recommended to consult the user manual for specific instructions or contact a professional technician.
Store raw meats on the bottom shelf to prevent contamination. Use the crisper drawers for fruits and vegetables. Keep dairy products in the main compartment rather than the door for consistent temperature.
The Bosch Series 2 KIL42NSE0G does not include a water dispenser or filter. If your model has an optional filter, refer to the user manual for specific replacement instructions.
Check if the defrost drain is blocked or if the refrigerator is level. Clear any blockages in the drain and ensure the appliance is positioned correctly. If the issue continues, a technician may need to inspect it.