Bosch Series 2 DWK87EM60B Energy Label

To install the Bosch Series 2 DWK87EM60B Hood, follow the installation manual provided in the package. Ensure that the mounting surface is sturdy and use the correct anchor screws. Follow electrical safety standards when connecting to the power supply.
The filters of the Bosch Series 2 DWK87EM60B Hood can be cleaned by removing them and placing them in a dishwasher. Alternatively, soak them in warm soapy water, rinse, and allow them to dry before reinstalling.
If the hood does not turn on, check the power connection and ensure that the circuit breaker has not tripped. Verify that the power switch is functioning. If issues persist, consult a qualified technician.
Regular maintenance includes cleaning the filters every 3 months, checking the ductwork for blockages annually, and inspecting the electrical connections. Schedule professional service every 2 years for optimal performance.
To change the light bulb, turn off the power to the hood. Remove the light cover, then carefully replace the bulb with a new one of the same type and wattage. Reattach the cover and restore power.
If the hood is noisy, check for blockages in the ductwork and ensure the fan blades are not obstructed. Tighten any loose screws. If the noise persists, contact customer support.
Yes, the Bosch Series 2 DWK87EM60B Hood can operate in recirculation mode. You will need to install a recirculation kit, which includes carbon filters, to effectively remove odors from the air.
The fan speed can be adjusted using the control panel on the hood. Press the fan speed button to cycle through the available settings until you reach the desired level.
The Bosch Series 2 DWK87EM60B Hood is designed to be energy efficient, featuring an energy rating of A, which ensures optimal performance with reduced energy consumption.
To reset the filter indicator, press and hold the filter reset button on the hood's control panel until the indicator light turns off. This will reset the maintenance reminder.