Bosch Series 2 DWK67EM60B Energy Label

Bosch Series 2 DWK67EM60B Hood manual cover

Pages 1

Year 2014

Language(s)

of 1

Bosch Series 2 DWK67EM60B Hood Specification

The Bosch Series 2 DWK67EM60B Hood is designed to offer an efficient and stylish solution for kitchen ventilation. This wall-mounted chimney hood boasts a sleek black glass finish that complements modern kitchen aesthetics. It operates with an extraction rate of up to 400 m³/h, ensuring effective removal of cooking odors and smoke. The unit features a powerful yet quiet motor, with a maximum noise level of 66 dB, allowing for a more pleasant kitchen environment.

The hood is equipped with LED lighting, providing bright and energy-efficient illumination of the cooking area. It incorporates three power levels, along with an intensive setting, which can be adjusted through simple touch controls to suit different cooking needs. The hood uses a high-quality metal grease filter, which is dishwasher safe, making maintenance straightforward and convenient.

For versatility, the DWK67EM60B can be installed to operate in either ducted or recirculation modes, with the latter requiring an optional carbon filter for odor absorption. Its dimensions are designed to fit comfortably above standard kitchen hobs, with a width of 60 cm, making it suitable for a range of kitchen sizes. The design is not only functional but also intended to enhance the kitchen's overall aesthetics with its modern lines and minimalist appearance.

Engineered for reliability and performance, the Bosch Series 2 DWK67EM60B Hood is a practical choice for those seeking an efficient ventilation solution that does not compromise on style or functionality.

Bosch Series 2 DWK67EM60B Hood F.A.Q.

How do I properly install the Bosch Series 2 DWK67EM60B Hood?

Ensure the hood is mounted at the recommended height above the cooktop, typically between 24 and 30 inches. Use a spirit level to ensure it is level, and secure it using the provided screws and wall anchors. Connect the ductwork and electrical supply as per the installation manual.

What should I do if the hood is not venting properly?

Check for obstructions in the ductwork and clean any grease build-up. Ensure the vent is not blocked externally and that the duct connections are secure. If the issue persists, consider checking the motor functionality.

How often should I clean the grease filters?

The grease filters should be cleaned every 1 to 3 months, depending on usage. They can typically be washed in warm soapy water or in a dishwasher if the manual indicates they are dishwasher-safe.

What type of lighting is used in the Bosch Series 2 DWK67EM60B Hood?

This model uses LED lighting, which provides bright illumination and is energy-efficient. If a bulb replacement is needed, ensure to use compatible LED bulbs as specified in the manual.

How can I reduce noise levels from the hood?

Ensure the hood is securely mounted and the ductwork is properly installed without any blockages. Operate the hood at a lower speed setting for reduced noise, and check if the fan or motor needs servicing.

What maintenance is required to keep the hood in optimal condition?

Regularly clean the grease filters, check for blockages in the ductwork, and wipe down the exterior surfaces with a non-abrasive cleaner. Inspect the lights and replace them if necessary.

The touch controls are unresponsive. How can I fix this?

First, ensure the hood is receiving power. Try resetting the hood by turning off the circuit breaker for a few minutes. If the problem persists, consult the manual or contact Bosch support for further assistance.

Can I operate the hood without ductwork?

Yes, the hood can be used in recirculation mode with a carbon filter installed, which helps to filter and clean the air before recirculating it back into the kitchen. Ensure regular replacement of the carbon filter as needed.

Why is there a burning smell when I use the hood?

This could be due to grease build-up on the filters or ductwork. Clean or replace the filters and check the ductwork for any obstructions or residue. If the problem continues, inspect the motor and interior components for overheating or damage.

How do I replace the LED lights on the hood?

Turn off the power to the hood. Access the light compartment by removing the cover or panel as instructed in the manual. Replace the LED lights with compatible bulbs and reassemble the cover. Ensure the power is restored and test the lights.