Bontrager Flare R Instruction Manual

To install the Bontrager Flare R, first attach the mounting bracket to your seat post using the included rubber strap. Ensure it's secure, then slide the Flare R light onto the bracket until it clicks into place.
The Bontrager Flare R has a battery life of up to 15 hours in flash mode, 6 hours in night steady mode, and 4.5 hours in day steady mode.
To charge the Bontrager Flare R, use the included micro-USB cable. Connect it to the charging port on the light and plug the other end into a USB power source. A full charge takes approximately 2 hours.
If your Flare R isn't turning on, first ensure it is charged by connecting it to a power source. If it still doesn't turn on, try resetting it by holding the power button for 10 seconds.
The Bontrager Flare R is visible from up to 2 kilometers away during the day, thanks to its powerful 65-lumen output and balanced optics.
Yes, the Bontrager Flare R is water-resistant and designed to function in wet conditions. However, it should not be submerged in water.
To switch between modes on the Bontrager Flare R, press the power button. Each press cycles through the modes: day flash, night flash, day steady, and night steady.
If the mounting bracket is loose, check the rubber strap for wear or damage. Ensure it is securely fastened around the seat post. If needed, tighten or replace the strap.
Yes, the Bontrager Flare R has a battery indicator light. It will flash red when the battery is low, and remain green when the battery is sufficiently charged.
Yes, the Bontrager Flare R can be attached to a helmet mount if you have the appropriate adapter. Ensure the mount is securely fastened to avoid any safety hazards.