Bissell ProHeat2x Revolution 1858 Series User Guide
![Bissell ProHeat2x Revolution 1858 Series manual cover](/images/54f624af427d14b712b7b0e0/thumbs/thumb175x175.webp)
To assemble the Bissell ProHeat 2X Revolution 1858, attach the handle to the base, secure it with screws, and connect the hose and tools as instructed in the user manual.
Remove the clean water tank, unscrew the cap, fill it with hot tap water to the water fill line, and add formula to the formula fill line.
Use the slider on the side of the machine to toggle between 'Deep Clean' and 'Express Clean' modes.
Check if the clean water tank is empty, ensure the tank is seated properly, and inspect the spray nozzle for clogs.
Remove the nozzle and brush roll cover, then pull out the brush rolls for cleaning with warm water and a mild detergent.
Ensure the dirty water tank is not full and is seated correctly. Check for blockages in the hose and foot of the machine.
Empty and rinse the tanks, clean the nozzle and brush rolls, then store the machine in a dry area.
For optimal performance, use only Bissell cleaning formulas designed for use with this machine.
Inspect the belt regularly and replace it if it shows signs of wear or damage. Typically, check every 6-12 months.
Regularly clean the tanks, brush rolls, and nozzle. Check and remove any debris from the suction path and inspect the belt and hose connections.