Bissell ICONpet Cordless 2602S User Guide
![Bissell ICONpet Cordless 2602S manual cover](/images/f039b8aa3ddbf20c887b3757/thumbs/thumb175x175.webp)
To assemble the Bissell ICONpet Cordless 2602S, first attach the motorized brush roll to the main body of the vacuum. Then, slide the handle into the top of the main body until it clicks into place. Ensure all connections are secure before use.
If your Bissell ICONpet is not charging, first ensure the charger is properly plugged into a functioning power outlet. Check that the charging cable is securely connected to the vacuum. If the battery still does not charge, consider replacing the battery or contacting Bissell customer support.
It is recommended to clean the filters of your Bissell ICONpet Cordless 2602S every month. Rinse the filters with warm water and allow them to air dry completely before reinstalling.
To clean the brush roll, first ensure the vacuum is turned off and disconnected from power. Remove the brush roll from the vacuum head, and use scissors to cut away any tangled hair or debris. Rinse the brush roll under warm water if necessary, and ensure it is completely dry before reinstalling.
To empty the dirt tank, press the release button to detach the tank from the vacuum. Hold the tank over a trash bin and press the bottom release button to open the lid and empty the contents. Close the lid and reattach the tank securely to the vacuum.
If your Bissell ICONpet loses suction power, check for blockages in the hose and the brush roll. Clean or replace filters if they are dirty or clogged. Ensure the dirt tank is not full, and all seals are properly in place.
Yes, the Bissell ICONpet Cordless 2602S is suitable for use on hardwood floors. It features a motorized brush roll that can be turned off to prevent scratches on delicate surfaces.
Store the Bissell ICONpet Cordless vacuum in a cool, dry place. Use the wall mount provided to hang the vacuum vertically, ensuring it is secure and the battery is not charging continuously.
The Bissell ICONpet Cordless 2602S has a battery life of up to 50 minutes on a full charge, depending on the power mode used. High power modes may reduce battery life.
To prolong the battery life of your Bissell ICONpet, avoid letting the battery completely discharge before recharging. Store the vacuum in a cool, dry place and charge it fully before first use. Avoid leaving the vacuum on charge continuously once it is fully charged.