Beldray EH3503TLB150 150 Climate Cube Instruction Manual
![Beldray EH3503TLB150 150 Climate Cube Cooler manual cover](/images/24f0c31aad16b9d4b19673b7/thumbs/thumb175x175.webp)
To clean the Climate Cube Cooler, first ensure it is unplugged. Remove the filter and rinse it with lukewarm water. Wipe the exterior with a damp cloth and mild detergent. Ensure all parts are completely dry before reassembling.
If the cooler is not turning on, check if it is plugged in securely and the power outlet is functional. Inspect the power cord for any visible damage. If everything seems fine, reset the unit by unplugging it for a few minutes, then plug it back in.
To maximize cooling efficiency, place the cooler near an open window or door to allow fresh air to circulate. Ensure the water tank is filled with cold water, or add ice cubes for enhanced cooling.
It is recommended to clean the filter and water tank every two weeks, especially during periods of heavy use. Regularly inspect the unit for any signs of wear and tear, and ensure all components are functioning properly.
To replace the filter, first turn off and unplug the unit. Remove the filter cover and take out the old filter. Insert the new filter into the designated slot and secure the cover back in place.
Unusual noises may be due to trapped debris or a misaligned filter. Turn off the cooler, unplug it, and inspect the interior for any obstructions. Reinstall the filter correctly and ensure all screws and components are secured.
It is not recommended to use essential oils with the Climate Cube Cooler as they may damage the unit and affect its performance. Only use water or the manufacturer-recommended cooling agents.
If the water tank is leaking, inspect it for cracks or damage. Ensure it is installed correctly and not overfilled. If a defect is found, contact Beldray customer support for assistance.
Before storing, empty the water tank and clean the unit thoroughly. Allow all parts to dry completely. Store the cooler in a dry, cool place, away from direct sunlight or extreme temperatures.
Yes, it is normal for a new cooler to emit a slight odor during initial uses. This should dissipate after a short period. If the odor persists, ensure the filter and water tank are clean.