Beldray EH3503 Climate Cube Instruction Manual

To set up your Beldray EH3503 Climate Cube Cooler, first ensure it's placed on a flat, stable surface. Fill the water tank with clean water, plug the unit into a power outlet, and use the control panel to select your desired settings.
Check if the power cord is properly connected to both the appliance and the power outlet. Ensure the outlet is working by testing it with another device. If the problem persists, consult the user manual or contact customer support.
To clean the water tank, first unplug the unit. Remove the tank and empty any remaining water. Use a soft cloth and mild detergent to wash the inside, then rinse thoroughly with clean water before reinserting it into the cooler.
Regularly clean the water tank and filter to prevent mold and odor. Check the air vents for dust accumulation and clean them if necessary. Replace the filter as recommended by the manufacturer for optimal performance.
An unpleasant smell may result from stagnant water or a dirty filter. Clean the water tank thoroughly and replace or clean the filter according to the maintenance instructions.
To adjust the fan speed, use the control panel on the top of the Climate Cube Cooler. Press the speed button to cycle through the available settings until you reach your preferred level.
Ensure the water tank is filled and the filter is clean. Check that the unit is placed in a well-ventilated area. If the problem persists, the filter may need replacing or the unit may require servicing.
Yes, adding ice to the water tank can enhance cooling performance. Be sure to follow the manufacturer’s guidelines regarding the amount of ice to use.
The filter should be replaced every 6 months or sooner if you notice decreased performance or unusual odors. Always refer to the user manual for specific replacement intervals.
Empty the water tank and clean the unit thoroughly. Allow it to dry completely, then store it in a cool, dry place away from direct sunlight. Cover the unit to protect it from dust.