Beldray EH3187B150 6 Litre Air Instruction Manual

To set up your Beldray EH3187B150 air cooler, first unpack all components and place the unit on a flat surface. Fill the water tank with clean water up to the 6-litre mark. Plug the device into a power outlet, and use the control panel to turn it on and adjust the settings as desired.
If your air cooler is not blowing cold air, check if the water tank is filled. Ensure the cooling pads are wet; if not, they may need soaking. Make sure the fan speed is set correctly and the air cooler is in the cooling mode.
It is advisable to clean the water tank at least once a week to prevent mold and mildew buildup. Empty the tank, rinse it with clean water, and wipe it down with a soft cloth.
Yes, you can add ice to the water tank to enhance the cooling effect. Make sure not to exceed the maximum water level when adding ice.
To replace the cooling pads, turn off and unplug the unit. Remove the back panel to access the pads, and carefully take out the old pads. Insert new pads, ensuring they fit snugly. Reattach the back panel securely.
Unusual noises can be due to loose parts or debris in the fan. Check for any loose screws or obstructions. If the noise persists, contact customer support for further assistance.
To improve efficiency, ensure the room is well-ventilated, and the cooler is positioned near an open window or door. Regularly clean the cooling pads and water tank to maintain optimal performance.
Before storing, empty and clean the water tank, and allow all parts to dry completely. Cover the unit to prevent dust accumulation and store it in a cool, dry place.
Water leakage is not normal. Check if the water tank is overfilled or if there are any cracks. Ensure the unit is on a flat surface and the water tank is properly positioned.
Ensure the power cord is properly plugged in and the outlet is functioning. Check the fuse or circuit breaker and replace it if necessary. If the problem persists, contact customer support.