Beldray EH3139V2 Ice Cube Plus Instruction Manual
![Beldray EH3139V2 Ice Cube Plus manual cover](/images/d088f737aa48fd18d4c53fb7/thumbs/thumb175x175.webp)
To set up the Beldray EH3139V2 Ice Cube Plus, first ensure the unit is on a flat surface. Fill the water tank with clean water, plug the device into a power outlet, and press the power button to start.
If your device does not turn on, check that it is properly plugged in and that the power outlet is working. Also, ensure the water tank is filled above the minimum level. If the problem persists, check the fuse in the plug.
To clean the unit, disconnect it from the power supply and empty the water tank. Use a soft cloth to wipe the exterior and a mild detergent for the water tank. Ensure all parts are dry before reassembling.
Regularly clean the water tank and filter to prevent build-up. Use distilled water to reduce mineral deposits and ensure proper airflow around the unit by not obstructing the vents.
To enhance cooling, add ice packs to the water tank and ensure the room is well-ventilated. Close windows and doors to trap cool air inside the room.
Unusual noises may indicate that the unit is not on a level surface or that there is debris in the fan. Ensure the unit is stable and clean the fan area if necessary.
Weak airflow could be due to a blocked filter or low water levels. Clean the filter regularly and ensure there is adequate water in the tank.
It is not recommended to use essential oils or fragrances in the Beldray EH3139V2 as they can damage the unit and affect its performance.
The filter should be checked monthly and replaced every 6 months, or more frequently if used in dusty environments.
Always ensure the unit is on a stable surface, do not overfill the water tank, and unplug the device when not in use or during cleaning. Keep the unit away from direct sunlight and heat sources.