Beldray EH1315 Premium 8 Litre Air Instruction Manual

To set up your Beldray EH1315 Air Cooler, first unpack all components and position the unit on a flat surface. Fill the water tank with clean water up to the 8-litre mark. Plug the unit into a power outlet and use the control panel to select your desired settings.
Ensure the water tank is filled and the cooling mode is activated. Check the cooling pads for blockage and clean them if necessary. Make sure the unit is not placed in direct sunlight as this can affect performance.
The cooling pads should be cleaned every two weeks to ensure optimal performance. Simply remove the pads and rinse them with clean water. Allow them to dry completely before reinserting them into the unit.
Yes, adding ice to the water tank can help increase the cooling effect. Ensure that the ice does not exceed the maximum water level indicator to prevent overflow.
Regularly clean the water tank, cooling pads, and exterior of the unit. Check for any signs of wear and tear and ensure all parts are functioning properly. Refer to the user manual for detailed maintenance instructions.
Check if the unit is placed on an uneven surface. Inspect the fan blades for any obstructions and remove any debris. If the noise persists, consult the user manual or contact customer support.
Yes, it is safe to leave the air cooler on overnight. Ensure the water tank is filled and the unit is placed on a stable surface. For energy efficiency, use the timer function to automatically turn off the cooler.
The Beldray EH1315 Air Cooler is ideal for rooms up to 20 square meters. Ensure proper ventilation for optimal cooling performance.
To drain the water tank, unplug the unit and remove the water tank cap located at the bottom. Allow the water to completely drain out before securely replacing the cap.
Yes, the air cooler can be used without water in fan-only mode. However, to achieve cooling, the water tank needs to be filled.