Beldray EH1162 Porto LED Electric Wall Fire Instruction Manual
![Beldray EH1162 Porto LED Electric Wall Fire manual cover](/images/45ef017561412a75e7543bff/thumbs/thumb175x175.webp)
To install the Beldray EH1162 Porto LED Electric Wall Fire, first ensure the wall is solid and capable of supporting the unit's weight. Use the provided wall bracket and fixings to securely mount the unit following the instructions in the user manual. Ensure the fire is level and firmly attached before connecting it to a power source.
Flickering LED lights can be due to a loose connection or a faulty LED strip. First, turn off the power and check all electrical connections. If the issue persists, contact Beldray customer service for further assistance.
Ensure the unit is turned off and cool before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Avoid using abrasive cleaners or solvents. For the glass front, use a glass cleaner and a lint-free cloth.
Regular maintenance includes dusting the exterior, checking for loose connections, and ensuring the air inlets and outlets are unobstructed. Perform these checks monthly to ensure optimal performance.
Check if the unit is properly connected to the power supply and ensure the power switch is turned on. Verify that the remote control has functioning batteries. If these steps don't resolve the issue, consult the user manual or contact customer support.
To adjust the flame brightness, use the remote control and press the brightness button. Cycle through the available settings until you reach your desired brightness level.
Yes, the Beldray EH1162 can operate with just the flame effect without producing heat. Use the remote control to activate the flame setting while keeping the heater function off.
Immediately turn off the unit and unplug it from the power source. Check for any obstructions or debris in the air vents and ensure the unit is clean. If the smell persists, contact a qualified technician or Beldray customer service.
To replace the batteries, open the battery compartment on the back of the remote control. Remove the exhausted batteries and insert new ones, ensuring they are installed with the correct polarity. Close the compartment securely.
Ensure the unit is connected to a power source and the heater function is turned on. Check the thermostat setting to ensure it is not set too low. If the problem persists, refer to the troubleshooting section in the manual or contact customer service.