Beldray EH0880 5 Fin Mini oil Radiator Instruction Manual
![Beldray EH0880 5 Fin Mini oil Radiator manual cover](/images/e9698237554511805301e904/thumbs/thumb175x175.webp)
Ensure the radiator is placed on a flat, stable surface. Plug it into a mains outlet, and use the power switch to turn it on. Adjust the thermostat to the desired temperature.
Check if the power cord is properly plugged in and ensure the power switch is turned on. Confirm the thermostat is set to a higher temperature than the current room temperature.
No, the Beldray EH0880 is not designed for use in high moisture areas such as bathrooms. It should be used in dry, indoor environments.
Ensure the radiator is turned off and unplugged. Use a soft, damp cloth to wipe down the exterior. Avoid using abrasive cleaners or immersing the unit in water.
Regularly dust the exterior with a soft cloth and check the power cord for any signs of damage. Store the radiator in a dry place when not in use.
Ensure the radiator is turned off and cool before moving. Use the integrated handle to lift and transport it safely to a new location.
Yes, occasional clicking or popping sounds can occur as the oil heats up and expands. This is normal and does not indicate a malfunction.
Turn off the radiator immediately and unplug it. Inspect for any damage before using it again. If damaged, contact customer support.
It is not recommended to use an extension cord as it may overheat. Plug the radiator directly into a wall outlet.
Use the thermostat to maintain a consistent room temperature and turn off the radiator when not needed to conserve energy.