Beldray EH0792 Boden Electric Stove Instruction Manual
![Beldray EH0792 Boden Electric Stove manual cover](/images/98daf3dacc9cb0b5c60f6499/thumbs/thumb175x175.webp)
To switch on the Beldray EH0792 Boden Electric Stove, ensure it is plugged into a power source, then turn the power knob to your desired heat setting.
If the stove is not heating up, check if it is properly plugged in and the power switch is on. Ensure the thermostat is set above room temperature. If the issue persists, consult the manual for troubleshooting or contact customer support.
To clean the stove, first ensure it is turned off and unplugged. Use a soft, damp cloth to wipe the exterior. Avoid using abrasive cleaners or immersing the stove in water.
It is not recommended to use an extension cord with the Beldray EH0792. If necessary, ensure that the extension cord is rated for the appliance's power requirements to prevent overheating.
Flickering lights may indicate a loose connection or electrical issue. Ensure that the power cord is securely connected. If the problem continues, discontinue use and contact a qualified technician.
Adjust the thermostat by turning the temperature control knob to the desired setting. The stove will cycle on and off to maintain the set temperature.
Ensure the stove is placed on a stable, level surface to reduce vibrations. Regularly clean the fan and vents to prevent dust buildup, which can increase noise.
If the stove overheats, turn it off immediately and unplug it. Allow it to cool down before using it again. Check for obstructions in the vents and ensure the thermostat is not set too high.
Perform basic maintenance, such as cleaning the exterior and checking the power cord, every few months. For more detailed maintenance, refer to the user manual for guidance.
The Beldray EH0792 is not designed for use in damp or wet environments such as bathrooms. Using it in such locations can pose a risk of electric shock.