Beldray BEL0608 Turbo Max Cordless Cleaner Instruction Manual
![Beldray BEL0608 Turbo Max Cordless Vacuum Cleaner manual cover](/images/050720c0607fe7c0c40621a8/thumbs/thumb175x175.webp)
To assemble the Beldray BEL0608, first attach the handle to the main body until it clicks into place. Then, insert the desired nozzle or attachment onto the suction end. Ensure all parts are securely connected before use.
Remove the filter from the vacuum, tap it gently to remove loose dust, then rinse it under lukewarm water. Allow the filter to dry completely before reinserting it into the vacuum cleaner.
The battery of the Beldray BEL0608 Turbo Max Cordless Vacuum Cleaner lasts up to 40 minutes on a full charge, depending on the power setting used.
First, check if the dust container is full and needs emptying. Then, inspect the filters for any blockages and clean them as necessary. Also, ensure that the nozzle or hose is not obstructed.
Yes, the Beldray BEL0608 is suitable for use on both carpets and hard floors. Use the appropriate attachment for each surface type to optimize cleaning performance.
It is recommended to replace the filters every 6-12 months, depending on usage frequency. Regularly check the condition of the filters to determine if an earlier replacement is necessary.
Ensure that the charging cable is properly connected to both the vacuum and the power outlet. Check for any damage to the cable. If the problem persists, contact Beldray customer support for further assistance.
The Beldray BEL0608 features a foldable handle, allowing it to be stored compactly in small spaces. Simply fold the handle down when storing.
Turn off the vacuum and detach the brush head. Use scissors or a seam ripper to carefully cut and remove any tangled hair or fibers from the brush.
Empty the dust container into a trash bag or bin. It's advisable to do this outside to avoid dust spreading indoors. Ensure the container is securely closed before disposing of the bag.