Beldray BEL0499 Cordless Wet and Dry Vac Instruction Manual

To charge the Beldray BEL0499, connect the charging adapter to the vacuum's charging port and plug it into a power outlet. The charging indicator light will illuminate to show that charging is in progress.
The Beldray BEL0499 provides up to 30 minutes of continuous cleaning on a full charge, depending on the mode of use.
To switch between wet and dry cleaning, ensure that the vacuum is turned off, then attach the appropriate nozzle for the task. For wet cleaning, use the squeegee nozzle, and for dry cleaning, use the standard nozzle.
Yes, the Beldray BEL0499 can be used on carpets for removing small debris and dust. However, it is not suitable for deep carpet cleaning.
To clean the filter, first detach it from the vacuum unit. Rinse the filter under running water and allow it to dry completely before reinserting it into the vacuum.
If the vacuum loses suction power, check for blockages in the nozzle or hose, and ensure that the filter is clean and properly installed.
Yes, the Beldray BEL0499 is designed for both wet and dry cleaning, making it safe to vacuum liquid spills. Ensure that you use the wet cleaning nozzle for optimal performance.
Store the Beldray BEL0499 in a cool, dry place. Ensure it is turned off and fully charged if storing for an extended period.
Regularly clean the filter, empty the dust container after each use, and check for any blockages in the nozzle or hose. Keep the vacuum clean and store it properly.
If the vacuum does not turn on, check if it is fully charged. If the issue persists, check the power connection and ensure that the charging adapter is functioning correctly.