Beldray BEL0467 Window Cleaning Instruction Manual
![Beldray BEL0467 Window Cleaning Vacuum manual cover](/images/10eb21898909c943e2f0e38e/thumbs/thumb175x175.webp)
To charge the Beldray BEL0467, connect the included charger to the vacuum and plug it into a power outlet. The indicator light will show red while charging and will turn green once fully charged.
The Beldray BEL0467 provides approximately 30 minutes of continuous use on a full charge.
To clean the water tank, detach it from the vacuum, empty the contents, and rinse thoroughly with warm soapy water. Ensure the tank is completely dry before reattaching.
Ensure the squeegee is clean and free from debris. Check that the water tank is not full and that the vacuum is fully charged. If the problem persists, refer to the troubleshooting section in the user manual.
Yes, the Beldray BEL0467 can be used on mirrors, tiles, and shower screens. Avoid using on surfaces that are not water-resistant.
Store the Beldray BEL0467 in a cool, dry place. Ensure the water tank is empty and the device is fully charged or discharged to prolong battery life.
Check if the device is fully charged. If it still doesn't turn on, inspect the charger and power outlet for issues. If necessary, consult the user manual for further troubleshooting steps.
Clean the water tank and squeegee after each use to maintain optimal performance. Regularly check for any clogs or debris that might affect the vacuum's efficiency.
Yes, you can use mild, non-abrasive cleaning solutions. Avoid harsh chemicals that may damage the device. Ensure the solution is compatible with the surfaces being cleaned.
To replace the squeegee, detach the current one by pulling it gently from the main body. Align the new squeegee and press it firmly into place until secure.