Beldray BEL0455 18.5V Lithium Cleaner Instruction Manual
![Beldray BEL0455 18.5V Lithium Vacuum Cleaner manual cover](/images/d3852774f4242a6756c81bdc/thumbs/thumb175x175.webp)
To assemble the Beldray BEL0455, first attach the handle to the main body. Ensure that it clicks into place securely. Then, attach the desired nozzle or accessory to the nozzle end of the vacuum.
If the vacuum loses suction, check for blockages in the hose or nozzle, empty the dust container, and clean or replace the filters as necessary. Ensure that all parts are properly connected.
To maintain the battery life, fully charge the vacuum before first use, avoid overcharging, and store in a cool, dry place. Regularly discharge and recharge the battery.
Remove the filters from the vacuum and gently tap them to remove dust. Rinse with warm water and let them air dry completely before reinserting them into the vacuum.
The Beldray BEL0455 provides approximately 30 minutes of runtime on a full charge, depending on usage and power settings.
If the vacuum is not turning on, ensure that the battery is charged, the power button is functioning, and that there are no obstructions in the moving parts. Check for any loose connections.
To empty the dust container, detach it from the main body by pressing the release button. Open the container lid and dispose of the contents. Reattach securely after cleaning.
Yes, the Beldray BEL0455 is designed for use on a variety of floor types, including hardwood, carpet, and tile. Use the appropriate setting and attachment for best results.
If the vacuum makes unusual noises, check for blockages, ensure all parts are securely attached, and inspect the motor and fan for damage. Clean any debris that may be causing the noise.
Filters should be replaced every 6-12 months, depending on usage frequency. Regular cleaning can extend their life, but replace them if they are damaged or overly clogged.