Beldray BEL0187 1000W Steam Cleaner Instruction Manual
![Beldray BEL0187 1000W Steam Cleaner manual cover](/images/9c7ad9ee4a4f7d53c1933f3b/thumbs/thumb175x175.webp)
To assemble the Beldray BEL0187 Steam Cleaner, begin by attaching the extension tubes to the main unit. Then, connect the desired nozzle or attachment to the end of the extension tube. Ensure all connections click into place securely before use.
The Beldray BEL0187 Steam Cleaner is suitable for cleaning a variety of surfaces, including sealed hard floors, tiles, glass, and bathroom fittings. Avoid using on unsealed wood or delicate surfaces.
To fill the water tank, first ensure the unit is unplugged and cooled down. Remove the tank, unscrew the cap, and fill with clean water up to the maximum level indicator. Secure the cap before reattaching the tank to the unit.
If the steam cleaner is not producing steam, check that the water tank is filled and securely attached. Ensure the unit is plugged in and the power switch is on. Wait a few minutes for the cleaner to heat up. If the problem persists, consult the troubleshooting section of the manual.
To descale the steam cleaner, mix a solution of equal parts water and white vinegar. Fill the water tank with this solution and run the cleaner until the tank is empty. Rinse thoroughly with clean water before the next use.
The Beldray BEL0187 Steam Cleaner typically takes about 2-3 minutes to heat up and be ready for use. Ensure the water tank is filled and the unit is plugged in and switched on.
No, the Beldray BEL0187 Steam Cleaner is designed to be used with water only. Using detergent or any chemical cleaners can damage the unit and void the warranty.
If the steam cleaner leaks water, ensure that the water tank is properly secured and not overfilled. Check for any cracks or damage to the tank. If the issue persists, contact customer support for assistance.
After use, make sure the steam cleaner is unplugged and fully cooled. Empty any remaining water from the tank. Clean the attachments and store the unit in a cool, dry place. Avoid wrapping the power cord tightly around the unit.
Yes, the Beldray BEL0187 Steam Cleaner is equipped with a safety lock on the handle to prevent accidental steam discharge. Always ensure the lock is engaged when the cleaner is not in use.