Beldray BEL01004 Airgility Pet Max Instruction Manual
![Beldray BEL01004 Airgility Pet Max manual cover](/images/74432b669e338f2d943aac9d/thumbs/thumb175x175.webp)
To assemble the Beldray BEL01004, start by attaching the handle to the main body. Then, connect the dust container and ensure it clicks into place securely. Attach the desired accessory or nozzle to the hose or main unit as needed.
Remove the filters from the vacuum unit and tap them gently to remove loose dust. Rinse them under lukewarm water until the water runs clear. Allow the filters to dry completely before reinserting them into the vacuum.
Ensure the dust container is not full and the filters are clean. Check for blockages in the hose or nozzle. Make sure all parts are securely attached and that the vacuum is set to the correct height for the surface being cleaned.
Turn off and unplug the vacuum. Remove the brush roll by following the manufacturer's instructions. Use scissors or a brush to remove hair and debris. Reinstall the brush roll securely before using the vacuum again.
If the vacuum overheats, turn it off and unplug it immediately. Check for blockages or full dust containers. Allow the vacuum to cool for at least 45 minutes before attempting to use it again.
Yes, the Beldray Airgility Pet Max is suitable for use on hardwood floors. Ensure the appropriate setting is selected to prevent scratching and maximize cleaning efficiency.
It is recommended to replace the filters every 3 to 6 months, depending on usage frequency and the type of debris commonly cleaned.
Store the vacuum in a cool, dry place. Ensure the dust container is empty and the cord is neatly wrapped to prevent damage. It is also advisable to store it in an upright position to save space.
To improve suction power, ensure all filters are clean and unobstructed. Check for any blockages in the hose or attachments. Make sure the dust container is not full and is properly seated.
Yes, it is normal for the vacuum to produce some noise during operation. However, if the noise is excessive or unusual, check for blockages, loose parts, or contact Beldray customer service for further assistance.