be quiet! Pure Loop 240mm Data Sheet
![be quiet! Pure Loop 240mm Cooler manual cover](/images/YkOUspRKqsOhwbyZdpYUgKzN/thumbs/thumb175x175.webp)
Begin by mounting the radiator in your case. Then, attach the fans using the provided screws. Apply thermal paste to your CPU and secure the cooler's pump unit using the appropriate mounting bracket for your CPU socket. Connect the pump and fan power cables to your motherboard.
Check fan and pump connections to ensure they are secure. Inspect for obstructions in the fan blades or radiator. If noise persists, consider adjusting the fan speed through BIOS or software to reduce RPM levels.
Locate the refill port on the radiator and remove the cap. Use the provided coolant bottle to slowly add liquid until the system is full. Replace the cap securely and check for leaks before powering on the system.
Regularly check for dust buildup on the radiator and fans, cleaning them with compressed air as needed. Periodically inspect for leaks and refill the coolant every 2 years or if levels are low.
Fan speed can be controlled via your motherboard's BIOS settings or through fan control software. Ensure the fans are connected to a controllable fan header on the motherboard.
Yes, the cooler can be mounted in various orientations, such as top, front, or side, depending on your case layout. Ensure the pump is below the highest point of the loop to avoid air pockets.
The radiator dimensions are approximately 277mm x 120mm x 27mm, ensuring compatibility with most standard cases that support 240mm radiators.
Listen for a gentle humming sound from the pump when the system is powered on. Check motherboard BIOS or software for pump RPM readings to ensure it is functioning within normal parameters.
The cooler comes with two Pure Wings 2 120mm PWM fans, designed for quiet operation and efficient cooling performance.
Yes, the cooler is compatible with AM4 sockets and includes the necessary mounting hardware for installation on such motherboards.