Baxi 24 Duo-tec Combi Installation and Service Manual
![Baxi 24 Duo-tec Combi manual cover](/images/aa2ef6e05c8435c3475a8173/thumbs/thumb175x175.webp)
To reset your Baxi 24 Duo-tec Combi boiler, locate the reset button on the control panel, press and hold it for a few seconds until the boiler restarts.
Check the pressure gauge on the boiler; it should be between 1 and 1.5 bar. If it's below this, use the filling loop to add water to the system until the correct pressure is reached.
It is recommended to service your Baxi 24 Duo-tec Combi boiler annually by a qualified heating engineer to ensure efficient and safe operation.
The E119 error code indicates low water pressure in the boiler. Check the pressure gauge and refill the system as necessary.
Ensure regular maintenance, bleed radiators, insulate pipes, and consider upgrading to a smart thermostat to improve efficiency.
Check for any error codes, ensure the thermostat is set correctly, and verify that the water supply is on. If the problem persists, contact a professional technician.
Installation of the Baxi 24 Duo-tec Combi boiler should be performed by a Gas Safe registered engineer to ensure safety and compliance with regulations.
The ideal setting is generally 75°C for central heating and 60°C for hot water. Adjust according to personal comfort and efficiency needs.
Ensure your boiler is regularly serviced, keep the heating on at a low level during extreme cold, and insulate pipes to prevent freezing.
Common noises include banging (which may indicate kettling), whistling, or gurgling. Bleed radiators, check for air in the system, and consult a professional if noises persist.