Barska AX13092 User Manual
![Barska AX13092 Safe manual cover](/images/sFxYAwViFNcfrKZKaceKLZnZ/thumbs/thumb175x175.webp)
To set up the Barska AX13092 safe for the first time, insert the batteries into the keypad, enter the default code (usually found in the manual), and follow the instructions to set your personalized access code.
If you forget your access code, you can use the emergency key provided with the safe to open it. Once opened, follow the instructions in the manual to reset the code.
To change the batteries, open the safe using your access code or emergency key, remove the battery cover on the back of the door, replace the old batteries with new ones, and reattach the cover securely.
The Barska AX13092 safe requires four AA alkaline batteries. It's recommended to use high-quality batteries for optimal performance.
If the keypad is not responding, check if the batteries are properly installed and have sufficient charge. Replace if necessary. Also, ensure there is no moisture or dust affecting the keypad.
Yes, the Barska AX13092 safe comes with pre-drilled holes and mounting hardware to allow it to be securely bolted down to a floor or wall. Follow the installation instructions in the manual.
Regular maintenance includes checking battery levels, ensuring the locking mechanism is free of dust, and inspecting the safe for any physical damage. Clean the exterior with a soft, dry cloth.
To perform a factory reset, you may need to enter a special reset code or use the reset button inside the safe, as detailed in the user manual. This will revert the safe to its default settings.
If the safe does not open after entering the correct code, ensure the batteries are not depleted, and try again. If the issue persists, use the emergency key and contact Barska customer support for further assistance.
The Barska AX13092 safe is not specifically designed to be fireproof or waterproof. It's advised to store it in a location that minimizes exposure to extreme conditions.