Barska AF10930 Installation Instructions

To mount the Barska AF10930 sight, first ensure that your rifle is unloaded. Attach the sight to the rail using the included mounting hardware. Tighten the screws securely, but do not over-tighten to avoid damaging the sight or the rail.
Begin by setting up a target at a known distance. Use the windage and elevation adjustments on the sight to align the reticle with the point of impact. Fire a test shot and adjust as necessary until the sight is zeroed in.
Check to ensure that the sight is powered on and the battery is functioning. If the reticle is still not visible, try adjusting the brightness settings. If issues persist, consider replacing the battery or contacting customer support.
To change the battery, remove the battery compartment cover by unscrewing it. Replace the old battery with a new one, ensuring the polarity is correct. Screw the cover back on securely.
If the sight is fogging up, it may be due to moisture entering the scope. Ensure all seals are intact and consider using anti-fogging wipes. If the problem persists, contact customer service for further assistance.
Use a soft, lint-free cloth and lens cleaning solution to gently clean the lenses. Avoid using rough materials or excessive pressure, which could scratch the lens surface.
Regularly check for loose screws and ensure the sight is securely mounted. Keep the lenses clean and store the sight in a dry, cool place. Periodically check the battery and replace it as needed.
Use the adjustment knobs located on the side and top of the sight. The windage knob adjusts the horizontal alignment, while the elevation knob adjusts the vertical alignment. Make small adjustments and test frequently for accuracy.
Ensure that the sight is mounted securely and that all screws are tightened. If the sight continues to lose zero, check for any physical damage or contact Barska for technical support.
Yes, the Barska AF10930 sight is equipped with an illuminated reticle that can be adjusted for brightness, making it suitable for use in low-light conditions.