Arneg Halifax Installation and Use Manual
![Arneg Halifax Refrigerated Cabinet manual cover](/images/rjJXvljxdEzXLWVzGwZEmMLo/thumbs/thumb175x175.webp)
To clean the Arneg Halifax, first unplug the unit. Remove all products and detachable shelves. Use a soft cloth with mild soap and water to clean the interior. Avoid abrasive cleaners. Rinse with clean water and dry thoroughly before reassembling.
Check if the thermostat is set to the correct temperature. Ensure the vents are not blocked and the condenser coil is clean. If the issue persists, consult the manual or contact Arneg support for further assistance.
Regular maintenance should be performed monthly, including cleaning the condenser coils, checking door seals, and inspecting for any unusual noises or vibrations. Annual professional servicing is recommended.
Ensure that products are evenly distributed and not blocking air vents. Avoid overloading to maintain optimal air circulation within the cabinet.
Ensure door seals are intact and replace if necessary. Keep the cabinet away from direct sunlight and heat sources. Regularly clean the condenser coils and ensure proper ventilation around the unit.
First, check if the cabinet is level and adjust the feet if necessary. Ensure there are no loose parts inside. If the noise persists, it may require professional inspection.
Ensure the door is closed properly and not opened frequently. Check the door seals for damage and replace if necessary. Defrost the cabinet as recommended in the user manual.
The recommended temperature setting for optimal performance is between 2°C and 5°C, depending on the type of products stored. Refer to the manual for specific guidelines.
To replace the interior lighting, first disconnect the power. Remove the light cover and replace the bulb with the specified type as per the user manual. Reattach the cover and reconnect the power.
Check if the drain is clogged and clean it if necessary. Inspect door seals for damage. Ensure the cabinet is level to prevent water from pooling. If the problem persists, consult a technician.