Ariens High Sierra 934026-1848H 2000 Operator Manual
![Ariens High Sierra 934026-1848H 2000 Tractor manual cover](/images/slRqtyyXLkormBzlSGUcgKOD/thumbs/thumb175x175.webp)
To start the Ariens High Sierra 934026-1848H tractor, ensure the brake is engaged, the PTO is off, and the throttle is set to half. Turn the ignition key to the start position until the engine starts, then release it.
Perform regular maintenance every 25 hours of use, including checking oil levels, cleaning the air filter, and inspecting belts for wear. Replace the oil and oil filter every 50 hours.
Check if the transmission is in the correct gear and that the parking brake is fully released. Inspect the drive belt for wear or damage and ensure the hydrostatic release lever is in the engaged position.
Use SAE 30 motor oil for general use. In colder climates, SAE 10W-30 can be used. Always check the owner's manual for specific recommendations.
Ensure the tractor is off and the blades are stopped. Remove the deck, then use a wrench to remove the blade bolts. Replace the blades and secure them with the bolts, ensuring they are tightened properly.
Check the fuel level and ensure the fuel filter is not clogged. Inspect the air filter for dirt and clean or replace it if necessary. Also, check the spark plug for fouling.
Sharpen the mower blades regularly and ensure they are balanced. Adjust the deck height appropriately for the grass conditions and avoid mowing wet grass.
Locate the transmission drain plug and place a pan underneath. Remove the plug to drain the old fluid. Reinstall the plug and refill with the recommended transmission fluid to the proper level.
Clean the tractor thoroughly, change the oil, and add a fuel stabilizer to the gas tank. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Locate the deck belt tensioner and adjust it by loosening the lock nut and turning the adjustment bolt to achieve proper tension. Retighten the lock nut once the belt tension is correct.