Ariens 936 Series 936087 Operator Manual
![Ariens 936 Series 936087 Tractor manual cover](/images/rrCUyhWBpGKEpVaMJowGpVGe/thumbs/thumb175x175.webp)
To start the Ariens 936 Series 936087 Tractor, ensure the tractor is on a level surface. Engage the parking brake, place the transmission in neutral, and ensure the PTO is disengaged. Insert the key and turn it to the start position until the engine starts, then release the key.
It is recommended to change the oil in your Ariens 936087 Tractor after the first 5 hours of use and then every 50 hours of operation or annually, whichever comes first.
The Ariens 936 Series 936087 Tractor is designed to run on unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol.
If the tractor won't start, check the battery connections for corrosion, ensure fuel is reaching the engine, confirm the spark plug is functioning, and make sure the safety switches are engaged.
The recommended tire pressure for the Ariens 936087 Tractor is 10 PSI for the front tires and 12 PSI for the rear tires. Always check the pressure when the tires are cold.
To improve cutting performance, regularly sharpen the blades, ensure the deck is clean and free of debris, and adjust the cutting height to the desired level.
To maintain the battery, keep the terminals clean and free from corrosion. Charge the battery fully if the tractor is not used for extended periods. Store in a cool, dry place during the off-season.
If the tractor overheats, stop the engine immediately. Check for obstructions in the cooling fins and ensure the engine oil is at the correct level. Allow the engine to cool before restarting.
To replace the drive belt, disconnect the spark plug wire for safety, remove the mower deck, and then follow the belt routing diagram provided in the manual to replace the belt with a new one.
Regular maintenance includes checking oil levels, changing the oil and air filter, inspecting blades for sharpness, lubricating moving parts, and checking tire pressure. Perform these checks according to the maintenance schedule in the manual.