Ariens 936 Series 936080 Operator Manual
![Ariens 936 Series 936080 Tractor manual cover](/images/FPkkICvTcywPILeyiAXAUHmc/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine, then turn off and let it cool. Remove the oil drain plug and drain the oil into a suitable container. Replace the drain plug and refill with new oil as per the manufacturer's specifications.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10% as they can damage the engine.
Check the battery connections for corrosion or looseness, ensure the fuel tank has fresh gasoline, and inspect the spark plug for wear or damage. Replace any faulty parts as needed.
The recommended tire pressure is typically listed in the owner's manual. Generally, it is around 10-12 psi for the front tires and 12-15 psi for the rear tires.
The air filter should be checked and cleaned after every 25 hours of use and replaced at least once per season or every 100 hours of operation, whichever comes first.
First, check if the PTO switch is engaged. Inspect the belt for wear or damage and ensure it is properly tensioned. Check the electrical connections to the PTO clutch and replace the clutch if necessary.
To adjust the cutting height, locate the height adjustment lever near the seat or deck, and move it to the desired position. Ensure the deck is level for an even cut.
Clean the tractor thoroughly, change the oil, and add a fuel stabilizer to the gasoline. Store the tractor in a dry, sheltered area, and disconnect the battery to prevent drainage.
To replace the drive belt, first remove the mower deck. Then, release the tension on the belt and remove it from the pulleys. Install the new belt by reversing the removal process and ensuring proper tension.
Always read the operator's manual before use. Wear appropriate safety gear, keep bystanders away, and never operate on steep slopes. Ensure all safety devices are in place and functioning.