Ariens 935000 Series 935002 Owner's Manual
![Ariens 935000 Series 935002 Tractor manual cover](/images/BopGlEwzvhhyjtCouaRGZiXk/thumbs/thumb175x175.webp)
To start the Ariens 935002 Tractor, ensure the parking brake is engaged, the PTO is off, and the gear shift is in neutral. Turn the ignition key to the start position until the engine begins to run.
If the tractor won't start, check the battery connections for corrosion, ensure the fuel tank has gas, and verify that the spark plug is functional. Also, ensure the seat switch is engaged.
To change the oil, run the engine for a few minutes to warm it up, then turn it off. Place an oil pan under the engine, remove the drain plug, and let the oil drain completely. Replace the plug and refill with the recommended oil type and quantity.
Use SAE 30 oil for temperatures above freezing and 5W-30 for colder temperatures. Always check the owner's manual for specific oil recommendations.
Check if the mower deck is level and ensure the blades are sharp and not damaged. Also, inspect the tire pressure to ensure even contact with the ground.
To adjust the mower deck height, locate the height adjustment lever on the tractor. Move the lever to your desired cutting height, ensuring both sides of the deck are at the same level.
Regular maintenance tasks include checking and changing the oil, inspecting and replacing the air filter, sharpening the blades, checking tire pressure, and lubricating moving parts.
If the engine vibrates, check for loose parts, unbalanced blades, or debris stuck in the mower deck. Tighten any loose bolts and remove any obstructions.
To clean the tractor, remove grass clippings from the deck using a brush or compressed air. Wash the exterior with mild soap and water, avoiding direct water contact with the engine. Dry thoroughly to prevent rust.
Check the transmission fluid level and top it up if necessary. Inspect the drive belt for wear or damage and replace if needed. Consult the manual for further troubleshooting.