Allis-Chalmers 2097106 5020/9523 Parts Manual
![Allis-Chalmers 2097106 5020/9523 Tractor manual cover](/images/CIIzodkETMMZoJGCupcxcXAt/thumbs/thumb175x175.webp)
The recommended engine oil for the Allis-Chalmers 2097106 5020/9523 Tractor is SAE 10W-30 for general use. Be sure to check the owner's manual for any specific requirements.
If the tractor won't start, check the battery connections and charge level, ensure sufficient fuel is available, inspect the ignition system, and verify that the starter motor is functioning properly.
To change the hydraulic fluid, first, ensure the tractor is on a level surface. Remove the drain plug to drain old fluid, replace the plug, and fill the reservoir with new hydraulic fluid as per the manufacturer's specifications.
Routine maintenance should be performed every 100 hours of operation, which includes checking fluid levels, inspecting belts and hoses, and lubricating moving parts.
The proper tire pressure for the Allis-Chalmers 2097106 5020/9523 Tractor is typically between 20-28 psi for the front tires and 16-20 psi for the rear tires. Always refer to the operator's manual for exact specifications.
To adjust the brakes, locate the brake adjustment screws near the brake pedals. Turn the screws to tighten or loosen the brake tension to achieve the desired level of braking force.
If the tractor overheats, stop operation immediately and allow the engine to cool. Check the coolant level, ensure the radiator is not blocked, and verify that the fan is operational.
To improve fuel efficiency, maintain proper tire pressure, conduct regular maintenance, ensure the air filter is clean, and operate the tractor at the optimal RPM range.
Common signs that the clutch needs servicing include difficulty in shifting gears, a spongy clutch pedal, and unusual noises when engaging the clutch.
To store the tractor during the off-season, clean it thoroughly, drain the fuel, disconnect the battery, and cover it to protect against dust and moisture.