AGA Redfyre Central Heating Oil Installation Instructions
![AGA Redfyre Central Heating Oil Cooker manual cover](/images/VXqpWpQSWLikAOxZpqvUsQbX/thumbs/thumb175x175.webp)
To relight the pilot light, ensure the cooker is switched off and cooled down. Locate the pilot light access panel and follow the manufacturer's instructions. Typically, you will need to press and hold a reset button while igniting the pilot with a long-reach lighter.
Check the fuel supply to ensure there is no disruption. Also, inspect the thermostat settings and clean any blockages in the flue. If the problem persists, contact a certified technician for a thorough inspection.
It's recommended to service the oil cooker at least once a year. Regular maintenance ensures efficiency, prevents breakdowns, and prolongs the lifespan of the appliance.
Unusual noises can be due to trapped air in the system, debris in the oil line, or issues with the burner. Bleed the system to remove air and clean the oil line. If the noise continues, consult a professional technician.
To improve energy efficiency, ensure regular servicing, adjust the thermostat to an optimal setting, and use quality fuel. Additionally, insulate your home to reduce heat loss.
Use the type of oil recommended by the manufacturer, typically kerosene or gas oil. Always refer to the user manual for specific guidance and avoid mixing different types of oils.
Conversion may be possible but requires significant modifications and should only be performed by a qualified technician. Contact the manufacturer or a professional service provider for advice and potential conversion services.
First, switch off the cooker and let it cool. Remove the burners following the instructions in the user manual. Clean them with a non-abrasive cleaner and a soft brush, then reassemble them carefully.
Immediately check for leaks in the fuel line. Ensure that all connections are tight and inspect the burner for proper operation. If the odor persists, turn off the cooker and contact a technician to prevent potential safety hazards.
To reset the control panel, turn off the cooker and disconnect it from the power supply for a few minutes. Reconnect the power, then switch the cooker back on. This should reset the control system.