AGA Rayburn 440KB Installation Instructions
![AGA Rayburn 440KB Cooker manual cover](/images/ZBjURJnXjCyrTMpRzCMyUdNT/thumbs/thumb175x175.webp)
To ignite the AGA Rayburn 440KB, ensure the oil supply is turned on. Press and hold the ignition button while simultaneously pressing the oil control valve. Keep the button pressed for about 10 seconds after the flame is established to ensure it stays lit.
Check if the oil supply is uninterrupted and the control valve is set correctly. Inspect the burner for any blockages and make sure the flue is clear. If the issue persists, consult a professional technician.
It is recommended to service the AGA Rayburn 440KB cooker annually to ensure optimal performance and safety. Regular servicing helps in maintaining efficiency and prolonging the life of the cooker.
To clean the oven, let it cool completely, then remove all shelves and trays. Use a non-abrasive cleaner with a soft cloth or sponge. Avoid using water or cleaners on the burner and ensure all parts are dry before reassembling.
Adjust the temperature by turning the oil control valve to the desired setting. The cooker may take some time to adjust to new settings. Always refer to the manual for specific instructions regarding temperature adjustment.
Smoke could be due to a blocked flue or burner. Check and clear any blockages. Ensure the oil is clean and the cooker is properly ventilated. If the problem persists, contact a professional technician.
After a power outage, turn off the cooker and allow it to cool. Check the oil flow and reset the timer if necessary. Follow the ignition procedure to restart the cooker.
During winter, ensure the oil is not too thick by using an appropriate additive if necessary. Regularly check the flue for blockages caused by snow or ice. Increase the frequency of servicing to maintain efficiency.
Signs include reduced heating efficiency, unusual noises, or a fluctuating flame. If you notice these, check and replace the oil filter as per the manufacturer's guidelines.
It is not recommended to use the cooker during a service as it may interfere with the process and safety checks. Always wait until the service is completed and the cooker is reassembled.