AGA Rayburn 200K Users Instructions
![AGA Rayburn 200K Cooker manual cover](/images/oxMhDrVKQPeUUGwKptPKVUbo/thumbs/thumb175x175.webp)
To light the burner, ensure the cooker is connected to the power supply and the fuel supply is on. Turn the control knob to the 'Pilot' position and press it in. Hold it for 10-15 seconds to allow the pilot light to ignite, then turn the knob to the desired setting.
Check if the fuel supply is adequate and the burner is clean. Inspect the thermostat settings and ensure the control knob is set correctly. If the problem persists, consult a professional technician.
It is recommended to service your Rayburn cooker annually. Regular maintenance ensures efficient operation and prolongs the lifespan of the appliance.
The AGA Rayburn 200K requires electricity for ignition and control functions. It cannot be used during a power outage unless you have a backup power source.
Allow the cooker to cool before cleaning. Use a damp cloth with mild detergent for the oven interiors and hotplates. Avoid abrasive cleaners to prevent damage.
Ensure proper combustion by using correct fuel types, maintaining adequate ventilation, and cleaning the flue regularly to prevent soot build-up.
Maintain correct burner settings, ensure regular servicing, and use high-quality fuel to improve the efficiency of your Rayburn cooker.
Unusual noises may indicate burner issues or air in the fuel line. Check for blockages and ensure the burner is clean. If noises persist, contact a service technician.
To reset the thermostat, turn the control knob to the lowest setting and switch off the power for a few minutes. Turn the power back on and set the desired temperature.
If the pilot light goes out, turn the control knob to the 'Off' position and wait a few minutes. Then, follow the lighting instructions to relight the pilot. If it fails to stay lit, check for blockages or call a professional.