Adventuridge Solar Heated Camp User Manual

To fill the camp shower, remove the cap from the water reservoir, fill it with clean water using a hose or container, and securely replace the cap. Make sure the cap is tightly closed to prevent leaks.
The Adventuridge Solar Heated Camp Shower can hold up to 5 gallons (approximately 20 liters) of water. Do not exceed this capacity to ensure proper function and safety.
Under direct sunlight, the water can take approximately 3 hours to reach a comfortable shower temperature. Heating time may vary depending on the amount of sunlight and ambient temperature.
Use the reinforced hanging handle to suspend the shower from a stable structure like a tree branch or shower stand. Ensure the support can bear the weight of the filled shower bag.
Check the cap to ensure it is securely tightened. Inspect the bag for any punctures or tears and repair them with waterproof tape or a patch kit if necessary.
After each use, empty the shower and rinse it with clean water. Allow it to dry completely before storing. Periodically check for mold or mildew and clean with a mild detergent if necessary.
It is not recommended to use the camp shower in freezing temperatures as water inside the bag can freeze, potentially damaging the material.
Ensure the shower is completely dry before folding it and storing it in a cool, dry place away from direct sunlight to prevent material degradation.
The camp shower has a simple on/off valve attached to the shower hose. Adjust the valve to control the water flow to your preference.
Yes, it is safe to use soap and shampoo. Ensure you rinse out any soap residue from the bag after use to prevent buildup and maintain hygiene.