Acura TSX 2006 Navigation Manual
![Acura TSX 2006 Sedan manual cover](/images/UeDTkMsActrESXMSMnuqPZGc/thumbs/thumb175x175.webp)
To reset the maintenance required light, turn the ignition to the ON position without starting the engine. Press the TRIP button until the oil life is displayed, then hold the TRIP button for about 10 seconds until the oil life resets to 100%.
For a 2006 Acura TSX, it's recommended to use 5W-30 synthetic motor oil for optimal performance and protection.
Check the battery connections for corrosion and ensure the battery is charged. Verify that the starter motor is functioning and check if the fuel pump is operational. If the issue persists, consult a professional mechanic.
The recommended tire pressure for a 2006 Acura TSX is typically 32 psi for both front and rear tires. Always refer to the placard on the driver's side door jamb for the most accurate information.
Open the glove box and remove the damper cord. Press in the sides of the glove box to release it. Locate the cabin air filter cover, remove it, and replace the old filter with a new one. Reassemble in reverse order.
Engine overheating can be caused by low coolant levels, a faulty thermostat, a malfunctioning radiator fan, or a clogged radiator. Check these components and refill or replace as necessary.
Ensure Bluetooth is enabled on your phone. Press the "PHONE" button on the steering wheel, select "Add New Device," and follow the on-screen prompts to complete the pairing process.
First, check the gas cap to ensure it's tightened properly. If the light remains on, use an OBD-II scanner to read the error code, which will help diagnose the issue. Seek professional help if necessary.
Maintain regular service intervals, ensure tires are properly inflated, drive at steady speeds, and avoid rapid acceleration and braking to improve fuel efficiency.
Common causes of brake noise include worn brake pads, glazed rotors, or debris caught between the rotor and pad. Inspect these components and clean or replace as needed.