Acura ILX 2017 Navigation Manual

To connect your smartphone via Bluetooth, ensure Bluetooth is enabled on your phone. On the Acura ILX, press the 'Settings' button on the console, select 'Bluetooth', then 'Add New Device'. Your vehicle’s Bluetooth system will search for devices. Select your phone from the list and confirm the pairing code on both devices.
The recommended oil type for the Acura ILX 2017 is 0W-20 full synthetic oil. Always refer to the owner’s manual for the most accurate and up-to-date information.
To reset the maintenance light, turn the ignition to the 'ON' position without starting the engine. Use the 'INFO' button on the steering wheel to navigate to the 'Maintenance' screen. Press and hold the 'Select/Reset' button until the maintenance reset screen appears, then select 'Reset'.
If the keyless entry remote is not working, first check the battery in the remote and replace it if necessary. If the problem persists, try reprogramming the remote or consult your dealer for further assistance.
To replace the cabin air filter, open the glove compartment and remove the dampener arm. Press the sides of the glove box inward to release it. The cabin air filter is located behind the cover; remove the old filter and insert a new one, ensuring it is oriented correctly according to the airflow direction arrows.
To jump-start the Acura ILX, park a running vehicle close to it and turn both vehicles off. Connect the positive (red) cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the negative (black) cable to the negative terminal of the good battery, and finally to a metal surface on the engine block of the dead vehicle. Start the assisting vehicle, then the Acura ILX.
To adjust the clock, press the 'Settings' button on the infotainment system, select 'Clock', then 'Set Clock'. Use the interface to adjust the hours and minutes, and confirm your changes.
The recommended tire pressure for the Acura ILX 2017 is typically 33 PSI for both front and rear tires. Always check the placard located on the driver's side door jamb for the most accurate information.
To enable the rearview camera guidelines, ensure your vehicle is in reverse. The guidelines will automatically appear on the screen. If they are not visible, check the settings in the infotainment system to ensure that the guidelines are enabled.
If the check engine light comes on, first ensure that the gas cap is securely tightened. If the light remains on, it's advisable to have the vehicle scanned for error codes by a professional mechanic to determine the cause of the issue.